Daily Papers

Speculative decoding accelerates autoregressive generation by having a cheap draft propose tokens that a target verifies in parallel. Frontier models increasingly ship a built-in Multi-Token-Prediction (MTP/NEXTN) draft head under the assumption that the draft is negligibly cheap. At million-token context this breaks: an MTP draft head typically runs full attention over the entire KV cache at every draft step, so its read grows linearly with context and comes to dominate the draft cost -- precisely where speculation is most valuable. The effect compounds with draft length (a deep native draft can turn net-negative, slower than no speculation) and sharpens under hybrid/linear-attention targets, where cheaper verification leaves the draft's full-attention read exposed. We apply a StreamingLLM-style sliding window plus attention sink to the draft's attention only (Windowed-MTP), leaving full-attention verification intact. It is training-free, drop-in, and lossless by construction: the full-attention target still decides every accepted token, so windowing changes only which tokens are proposed, never which are accepted. It bounds the draft's KV working set to a constant, dropping ~99% of KV entries at 1M. Across three architecture families (Qwen GDN-MoE 35B/122B and a Mamba2-hybrid NoPE 120B) at 1M context on a single GPU in SGLang, windowing cuts the per-decode-step cost over the shipping native MTP draft by +28% to +44%, an input-invariant margin that widens with context. Since per-token latency is this cost divided by acceptance length, at matched acceptance end-to-end decode latency improves by the same amount, and more where windowing also lifts acceptance, while preserving the target's verified output distribution. Finally, the unread draft KV -- 7.7-11% of total KV at 1M -- is reclaimed via a compact ring buffer at no acceptance or quality cost.

Long chain-of-thought reasoning has made autoregressive decoding the dominant inference cost of modern large language models. Existing methods target either the input side (latent compression) or the output side (speculative decoding and multi-token prediction, MTP), but the two lines of work have been pursued independently. Moreover, output-side methods must incur an expensive verifier pass to validate the unreliable draft tokens predicted by MTP. To address these issues, we propose Pair-In, Pair-Out (PIPO), which unifies both sides by viewing a latent compressor and an MTP head as mirror-image operations: the compressor folds two input tokens into one latent representation, while the MTP head unfolds one hidden state into one additional output token. To remove the verifier cost without sacrificing reliability, PIPO trains a lightweight confidence head that decides whether draft tokens should be accepted. We observe that On-Policy Distillation (OPD) naturally matches the rejection-sampling criterion of speculative decoding, so the confidence head can be trained alongside OPD with negligible extra cost. Experiments on AIME 2025, GPQA-Diamond, LiveCodeBench v6, and LongBench v2 with Qwen3.5-4B and 9B backbones show that PIPO improves pass@4 over regular decoding by up to +7.15 points, while delivering up to 2.64times first-token-latency and 2.07times per-token-latency speedups. Project Page: GitHub.com/RedAI-Infra/PIPO.

The integration of Large Language Models (LLMs) into applications ranging from interactive chatbots to multi-agent systems has introduced a wide spectrum of service-level objectives (SLOs) for responsiveness. These include latency-sensitive requests emphasizing per-token latency in streaming chat, deadline-sensitive requests requiring rapid full responses to trigger external tools, and compound requests with evolving dependencies across multiple LLM calls. Despite-or perhaps, because of-this workload diversity and unpredictable request information (e.g., response lengths and dependencies), existing request schedulers have focused on aggregate performance, unable to ensure application-level SLO needs. This paper presents JITServe, the first SLO-aware LLM serving system designed to maximize service goodput (e.g., the number of tokens meeting request SLOs) across diverse workloads. JITServe novelly schedules requests using imprecise request information and gradually relaxes this conservatism by refining request information estimates as generation progresses. It applies a grouped margin goodput maximization algorithm to allocate just enough serving bandwidth to satisfy each request's SLO just-in-time (JIT), maximizing residual capacity for others, while deciding the composition of requests in a batch to maximize efficiency and goodput with provable guarantees. Our evaluation across diverse realistic workloads, including chat, deep research, and agentic pipelines, shows that JITServe improves service goodput by 1.4x-6.3x, alternatively achieving 28.5%-83.2% resource savings, compared to state-of-the-art designs.

Large Mixture-of-Experts (MoE) model inference is challenging due to high resource demands and dynamic workloads. Existing solutions often deploy the entire model as a single monolithic unit, which applies a unified resource configuration to both attention and expert modules despite their different requirements, leading to limited scalability and resource inefficiency. In this paper, we propose Janus, a scalable MoE inference system that disaggregates attention and experts on separate GPU sub-clusters, enabling each module to be managed and scaled independently. Janus incorporates three key designs for efficient, disaggregated MoE inference. First, it proposes an adaptive two-phase communication scheme that exploits intra- and inter-node bandwidth hierarchies for low-latency data exchange. Second, motivated by the memory-bound nature of MoE modules, Janus introduces a lightweight scheduler and implements it as a GPU kernel to balance the number of activated experts across GPUs at minimal overhead, thereby reducing inference latency. Third, Janus performs fine-grained resource management to dynamically adjust expert placement and independently scale attention and MoE resources to improve overall efficiency. Evaluation shows Janus achieves up to 3.9 higher perGPU throughput than state-of-the-art systems while meeting per-token latency requirements.

Leveraging attention sparsity to accelerate long-context large language models (LLMs) has been a hot research topic. However, current algorithms such as sparse attention or key-value (KV) cache compression tend to use a fixed budget, which presents a significant challenge during deployment because it fails to account for the dynamic nature of real-world scenarios, where the optimal balance between accuracy and efficiency can vary greatly. In this paper, we find that borrowing top-p sampling (nucleus sampling) to sparse attention can surprisingly achieve adaptive budgeting. Based on this, we propose Twilight, a framework to bring adaptive sparsity to any existing sparse attention algorithm without sacrificing their accuracy. Empirical results show that Twilight can adaptively prune at most 98% of redundant tokens, leading to 15.4times acceleration in self-attention operations and 3.9times acceleration in end-to-end per token latency in long context LLM decoding.

To schedule LLM inference, the shortest job first (SJF) principle is favorable by prioritizing requests with short output lengths to avoid head-of-line (HOL) blocking. Existing methods usually predict a single output length for each request to facilitate scheduling. We argue that such a point estimate does not match the stochastic decoding process of LLM inference, where output length is uncertain by nature and determined by when the end-of-sequence (EOS) token is sampled. Hence, the output length of each request should be fitted with a distribution rather than a single value. With an in-depth analysis of empirical data and the stochastic decoding process, we observe that output length follows a heavy-tailed distribution and can be fitted with the log-t distribution. On this basis, we propose a simple metric called Tail Inflated Expectation (TIE) to replace the output length in SJF scheduling, which adjusts the expectation of a log-t distribution with its tail probabilities to account for the risk that a request generates long outputs. To evaluate our TIE scheduler, we compare it with three strong baselines, and the results show that TIE reduces the per-token latency by 2.31times for online inference and improves throughput by 1.42times for offline data generation.

State Space Models (SSMs) such as Mamba achieve linear-time sequence processing through input-dependent recurrence, but this mechanism introduces a critical safety vulnerability. We show that the spectral radius rho(A-bar) of the discretized transition operator governs effective memory horizon: when an adversary drives rho toward zero through gradient-based Hidden State Poisoning, memory collapses from millions of tokens to mere dozens, silently destroying reasoning capacity without triggering output-level alarms. We prove an Evasion Existence Theorem showing that for any output-only defense, adversarial inputs exist that simultaneously induce spectral collapse and evade detection, then introduce SpectralGuard, a real-time monitor that tracks spectral stability across all model layers. SpectralGuard achieves F1=0.961 against non-adaptive attackers and retains F1=0.842 under the strongest adaptive setting, with sub-15ms per-token latency. Causal interventions and cross-architecture transfer to hybrid SSM-Attention systems confirm that spectral monitoring provides a principled, deployable safety layer for recurrent foundation models.

Top-k sparse attention makes long-context LLM decoding cheap to compute: each step reads only a few thousand selected KV entries rather than the full context. Serving systems, however, typically keep the entire KV cache in GPU HBM so that every position stays selectable, so a request's memory bill still grows with its full context length--decoding hits a capacity wall long before it runs out of compute, and a context whose KV cache exceeds HBM cannot be served at all. We present HiSparse, an exact, indexer-agnostic hierarchical KV cache for sparse-attention serving. HiSparse keeps each request's full KV history in host memory and bounds its decode footprint with a small, fixed-size GPU cache; a fused CUDA kernel resolves each layer's selections--hit detection, LRU replacement, and host-to-device fetches--inside the decode CUDA graph; and, for models that share selections across layers, exact layer-wise prefetching hides roughly half of the remaining miss overhead. Because only KV placement changes, model outputs are unchanged. HiSparse is merged into upstream SGLang and evaluated across three sparse-attention families (DSA, NSA, and Quest) on H200, B200, and GH200 platforms: it improves peak generation throughput by up to 4.7x on long-context workloads while preserving comparable per-token latency and reducing time-to-first-token at high load--and a no-IO oracle shows the resolution mechanism itself adds no measurable per-token cost, leaving host-device IO as the only price of bounded residency.

Serving large language models at long context is bottlenecked by the key-value (KV) cache, which is read in full at every decode step. Attention keys are locally low-rank though globally high-rank: a fixed low-rank sketch shared across pages is provably blind to page-specific directions, while at the same summary size a page's own basis ranks pages and keeps carriers far better. LOCKS gives every page its own rank-r spectral summary (resident, a tenth of the cache at r{=}8 and a twenty-fifth at r{=}2), reconstructs within-page logits, estimates each page's attention mass by log-sum-exp, and attends only the top pages; selection itself reads no candidate keys or values. Selecting on this summary alone stays within about a point of the full cache on long-document QA (LongBench-v1; Llama-3.1-8B), tracks the read-every-key exact-LSE oracle on retrieval-dense RULER down to the smallest budgets, and holds quality furthest into the small-budget regime on long-form reasoning (AIME26, MATH-500; Qwen3-4B), where selectors and eviction-based reasoning compressors both fall away. At a 2048-token budget LOCKS matches FullKV aggregate quality at 100K+ context (GLM-4-9B-Chat-1M) while attending about 2% of the tokens; since the summary is scanned in full each step, the per-step KV read falls by about 10--25times across that rank range, and this halves per-token decode latency (2.0times at 1M tokens on one H200 NVL, measured at r{=}8) against dense attention. LOCKS ships as a drop-in plugin for unmodified vLLM, with batched decode running in full CUDA graphs.

Dynamic sparse attention (DSA) accelerates long-context LLM decoding by attending to only the top-K KV blocks relevant to each query, but it introduces a serialized selection-to-attention dependency that emerges as a new latency bottleneck. We present PRR, a speculate-reuse-repair runtime that exploits temporal locality in DSA selections to predict likely blocks, speculate the attention over them while selection is in flight, and incrementally repair missed blocks once the true selected set is known. PRR uses a lightweight EMA-based predictor, a profiling-guided speculation budget that keeps speculative work off the critical path, and a FlashAttention-based repair kernel that folds missed blocks into the partial attention state using online-softmax statistics. Across long-context benchmarks and representative DSA methods, PRR reduces per-token decoding latency by up to 40% while preserving downstream task accuracy. Github: https://github.com/Tianyu9748/Incremental_FlashAttention

We expand the exponential kernel of attention into a truncated Taylor series of n terms and factorize each term into a tensor-power inner product, which collapses the causal history into exactly n recurrent states, each updated by one rank-one outer product per token and independent of context length N. The recursion is lossless with respect to the truncated kernel (2.2 times 10^{-16} in float64), and the states are additive across chunks (5.7 times 10^{-14}), so prefill admits a parallel scan. Measured exponents are t propto N^{2.28} for softmax against N^{0.91} for states, with a crossover at N approx 728 and 20.8times at N = 8192; per-token decoding latency is constant at 7.3,μs against N^{1.04} for softmax, giving 76.0times at N = 65536. Accuracy improves exponentially in n while cost grows combinatorially, since the m-th state is d+m-1{m} wide---a bound confirmed by SVD---so the optimum is second order, n = 3, at 6.5 times 10^{-4} error and 9{,}945 elements per head. Query and key normalization is a prerequisite: without it the argument exceeds the convergence radius and adding terms stops helping.

Large language models (LLMs) have shown remarkable capabilities in various tasks. However their huge model size and the consequent demand for computational and memory resources also pose challenges to model deployment. Currently, 4-bit post-training quantization (PTQ) has achieved some success in LLMs, reducing the memory footprint by approximately 75% compared to FP16 models, albeit with some accuracy loss. In this paper, we propose SmoothQuant+, an accurate and efficient 4-bit weight-only PTQ that requires no additional training, which enables lossless in accuracy for LLMs for the first time. Based on the fact that the loss of weight quantization is amplified by the activation outliers, SmoothQuant+ smoothes the activation outliers by channel before quantization, while adjusting the corresponding weights for mathematical equivalence, and then performs group-wise 4-bit weight quantization for linear layers. We have integrated SmoothQuant+ into the vLLM framework, an advanced high-throughput inference engine specially developed for LLMs, and equipped it with an efficient W4A16 CUDA kernels, so that vLLM can seamlessly support SmoothQuant+ 4-bit weight quantization. Our results show that, with SmoothQuant+, the Code Llama-34B model can be quantized and deployed on a A100 40GB GPU, achieving lossless accuracy and a throughput increase of 1.9 to 4.0 times compared to the FP16 model deployed on two A100 40GB GPUs. Moreover, the latency per token is only 68% of the FP16 model deployed on two A100 40GB GPUs. This is the state-of-the-art 4-bit weight quantization for LLMs as we know.

Reasoning-focused LLMs improve answer quality by generating longer reasoning traces, but the additional tokens dramatically increase serving cost, motivating inference optimization. We extend and apply Puzzle, a post-training neural architecture search (NAS) framework, to gpt-oss-120B to produce gpt-oss-puzzle-88B, a deployment-optimized derivative. Our approach combines heterogeneous MoE expert pruning, selective replacement of full-context attention with window attention, FP8 KV-cache quantization with calibrated scales, and post-training reinforcement learning to recover accuracy, while maintaining low generation length. In terms of per-token speeds, on an 8XH100 node we achieve 1.63X and 1.22X throughput speedups in long-context and short-context settings, respectively. gpt-oss-puzzle-88B also delivers throughput speedups of 2.82X on a single NVIDIA H100 GPU. However, because token counts can change with reasoning effort and model variants, per-token throughput (tok/s) and latency (ms/token) do not necessarily lead to end-to-end speedups: a 2X throughput gain is erased if traces grow 2X. Conversely, throughput gains can be spent on more reasoning tokens to improve accuracy; we therefore advocate request-level efficiency metrics that normalize throughput by tokens generated and trace an accuracy--speed frontier across reasoning efforts. We show that gpt-oss-puzzle-88B improves over gpt-oss-120B along the entire frontier, delivering up to 1.29X higher request-level efficiency. Across various benchmarks, gpt-oss-puzzle-88B matches or slightly exceeds the parent on suite-average accuracy across reasoning efforts, with retention ranging from 100.8% (high) to 108.2% (low), showing that post-training architecture search can substantially reduce inference costs without sacrificing quality.

Large language models run every token through every layer, regardless of difficulty. We present TIDE, a post-training system that attaches tiny learned routers at periodic checkpoint layers and, at inference time, selects the earliest layer whose hidden state has converged for each token. TIDE requires no model retraining, works with any HuggingFace causal LM, auto-detects GPU architecture, and supports float32, float16, and bfloat16 through fused CUDA kernels. On an NVIDIA A100 with DeepSeek R1 Distill 8B, TIDE achieves 100% prefill exit rate (5% of tokens exit at layer 11, the remaining at layer 31), reduces prefill latency by 7.2%, and increases single-batch throughput by 6.6%. During autoregressive decoding, 98-99% of tokens exit early while the model correctly solves a multi-step math problem with 95 unique output tokens. On Qwen3 8B (36 layers), throughput improves by 8.1% at batch size 8. Calibration on 2,000 WikiText samples takes under 3 minutes and produces a ~4 MB router checkpoint. The system comprises 1,308 lines of Python and 1,081 lines of CUDA/C++ with 74 passing tests. Code: https://github.com/RightNow-AI/TIDE

Reasoning language models such as OpenAI-o1, DeepSeek-R1, and Qwen achieve strong performance via extended chains of thought but often generate unnecessarily long outputs. Maximizing intelligence per token--accuracy relative to response length--remains an open problem. We revisit reinforcement learning (RL) with the simplest length penalty--truncation--and show that accuracy degradation arises not from the lack of sophisticated penalties but from inadequate RL optimization. We identify three key challenges: (i) large bias in advantage estimation, (ii) entropy collapse, and (iii) sparse reward signal. We address them with Doing Length pEnalty Right (DLER), a training recipe combining batch-wise reward normalization, higher clipping, dynamic sampling, and a simple truncation length penalty. DLER achieves state-of-the-art accuracy--efficiency trade-offs, cutting output length by over 70 percent while surpassing all previous baseline accuracy. It also improves test-time scaling: compared to DeepSeek-R1-7B, DLER-7B generates multiple concise responses in parallel with 28 percent higher accuracy and lower latency. We further introduce Difficulty-Aware DLER, which adaptively tightens truncation on easier questions for additional efficiency gains. We also propose an update-selective merging method that preserves baseline accuracy while retaining the concise reasoning ability of the DLER model, which is useful for scenarios where RL training data is scarce.

Streaming automatic speech recognition (ASR) aims to emit each hypothesized word as quickly and accurately as possible. However, emitting fast without degrading quality, as measured by word error rate (WER), is highly challenging. Existing approaches including Early and Late Penalties and Constrained Alignments penalize emission delay by manipulating per-token or per-frame probability prediction in sequence transducer models. While being successful in reducing delay, these approaches suffer from significant accuracy regression and also require additional word alignment information from an existing model. In this work, we propose a sequence-level emission regularization method, named FastEmit, that applies latency regularization directly on per-sequence probability in training transducer models, and does not require any alignment. We demonstrate that FastEmit is more suitable to the sequence-level optimization of transducer models for streaming ASR by applying it on various end-to-end streaming ASR networks including RNN-Transducer, Transformer-Transducer, ConvNet-Transducer and Conformer-Transducer. We achieve 150-300 ms latency reduction with significantly better accuracy over previous techniques on a Voice Search test set. FastEmit also improves streaming ASR accuracy from 4.4%/8.9% to 3.1%/7.5% WER, meanwhile reduces 90th percentile latency from 210 ms to only 30 ms on LibriSpeech.

Machine learning (ML) inference platforms are tasked with balancing two competing goals: ensuring high throughput given many requests, and delivering low-latency responses to support interactive applications. Unfortunately, existing platform knobs (e.g., batch sizes) fail to ease this fundamental tension, and instead only enable users to harshly trade off one property for the other. This paper explores an alternate strategy to taming throughput-latency tradeoffs by changing the granularity at which inference is performed. We present Apparate, a system that automatically applies and manages early exits (EEs) in ML models, whereby certain inputs can exit with results at intermediate layers. To cope with the time-varying overhead and accuracy challenges that EEs bring, Apparate repurposes exits to provide continual feedback that powers several novel runtime monitoring and adaptation strategies. Apparate lowers median response latencies by 40.5--91.5% and 10.0--24.2% for diverse CV and NLP classification workloads, and median time-per-token latencies by 22.6--77.9% for generative scenarios, without affecting throughputs or violating tight accuracy constraints.

Text-to-image (T2I) diffusion models have demonstrated impressive capabilities in generating high-quality images given a text prompt. However, ensuring the prompt-image alignment remains a considerable challenge, i.e., generating images that faithfully align with the prompt's semantics. Recent works attempt to improve the faithfulness by optimizing the latent code, which potentially could cause the latent code to go out-of-distribution and thus produce unrealistic images. In this paper, we propose FRAP, a simple, yet effective approach based on adaptively adjusting the per-token prompt weights to improve prompt-image alignment and authenticity of the generated images. We design an online algorithm to adaptively update each token's weight coefficient, which is achieved by minimizing a unified objective function that encourages object presence and the binding of object-modifier pairs. Through extensive evaluations, we show FRAP generates images with significantly higher prompt-image alignment to prompts from complex datasets, while having a lower average latency compared to recent latent code optimization methods, e.g., 4 seconds faster than D&B on the COCO-Subject dataset. Furthermore, through visual comparisons and evaluation on the CLIP-IQA-Real metric, we show that FRAP not only improves prompt-image alignment but also generates more authentic images with realistic appearances. We also explore combining FRAP with prompt rewriting LLM to recover their degraded prompt-image alignment, where we observe improvements in both prompt-image alignment and image quality.

We study the problem of efficient generative inference for Transformer models, in one of its most challenging settings: large deep models, with tight latency targets and long sequence lengths. Better understanding of the engineering tradeoffs for inference for large Transformer-based models is important as use cases of these models are growing rapidly throughout application areas. We develop a simple analytical model for inference efficiency to select the best multi-dimensional partitioning techniques optimized for TPU v4 slices based on the application requirements. We combine these with a suite of low-level optimizations to achieve a new Pareto frontier on the latency and model FLOPS utilization (MFU) tradeoffs on 500B+ parameter models that outperforms the FasterTransformer suite of benchmarks. We further show that with appropriate partitioning, the lower memory requirements of multiquery attention (i.e. multiple query heads share single key/value head) enables scaling up to 32x larger context lengths. Finally, we achieve a low-batch-size latency of 29ms per token during generation (using int8 weight quantization) and a 76% MFU during large-batch-size processing of input tokens, while supporting a long 2048-token context length on the PaLM 540B parameter model.

We introduce FFN Fusion, an architectural optimization technique that reduces sequential computation in large language models by identifying and exploiting natural opportunities for parallelization. Our key insight is that sequences of Feed-Forward Network (FFN) layers, particularly those remaining after the removal of specific attention layers, can often be parallelized with minimal accuracy impact. We develop a principled methodology for identifying and fusing such sequences, transforming them into parallel operations that significantly reduce inference latency while preserving model behavior. Applying these techniques to Llama-3.1-405B-Instruct, we create Llama-Nemotron-Ultra-253B-Base (Ultra-253B-Base), an efficient and soon-to-be publicly available model that achieves a 1.71X speedup in inference latency and 35X lower per-token cost while maintaining strong performance across benchmarks. Through extensive experiments on models from 49B to 253B parameters, we demonstrate that FFN Fusion becomes increasingly effective at larger scales and can complement existing optimization techniques like quantization and pruning. Most intriguingly, we find that even full transformer blocks containing both attention and FFN layers can sometimes be parallelized, suggesting new directions for neural architecture design.

Large Language Model (LLM) inference in production must meet stringent service-level objectives for both time-to-first-token (TTFT) and time-between-token (TBT) while maximizing throughput under fixed compute, memory, and interconnect budgets. Modern serving systems adopt stall-free scheduling techniques such as chunked prefill, which splits long prompt processing along the token dimension and interleaves prefill with ongoing decode iterations. While effective at stabilizing TBT, chunked prefill incurs substantial overhead in Mixture-of-Experts (MoE) models: redundant expert weight loads increase memory traffic by up to 39% and inflate energy consumption. We propose layered prefill, a new scheduling paradigm that treats transformer layer groups as the primary scheduling unit. By vertically partitioning the model into contiguous layer groups and interleaving prefill and decode across the groups, layered prefill sustains stall-free decoding while eliminating chunk-induced MoE weight reloads. It reduces off-chip bandwidth demand, lowering TTFT by up to 70%, End-to-End latency by 41% and per-token energy by up to 22%. Evaluations show that layered prefill consistently improves the TTFT--TBT Pareto frontier over chunked prefill, reducing expert-load traffic and energy cost while maintaining stall-free decoding. Overall, shifting the scheduling axis from tokens to layers unlocks a new operating regime for high-efficiency, energy-aware LLM serving in co-located environments.

Large Reasoning Models (LRMs) often reach a correct solution before their long Chain-of-Thought trace ends, yet continue with redundant verification, repeated attempts, or unnecessary exploration that wastes computation and can even overturn the correct answer. We frame this behavior as a latent productive-to-redundant transition and show it is directly reflected in hidden states: around first-correct-solution (FCS) boundaries, late-layer representations separate efficient from overthinking tokens, while boundary-permutation and position controls collapse. We propose ROM, a streaming intervention framework that monitors a frozen LRM with a lightweight hidden-state detector (sim0.1\% of backbone parameters) and intervenes at well-formed reasoning boundaries; Counterfactual Self-Correction (CSC) balances supervision with wrongrightarrowcorrect trajectories, preserving useful pre-FCS self-correction. Unlike prior adaptive early-exit methods, ROM extracts no intermediate answers, launches no probe decoding, and updates no backbone weights. Across five backbones from three model families and five reasoning benchmarks, against ten recent baselines under a shared protocol, ROM_{CSC} attains the highest accuracy in 19 of 25 model--benchmark settings, cuts response length by 28--77\% (mean 45\%) versus vanilla decoding, and is the only method on the accuracy--length Pareto front in every setting. The same MATH500-trained supervision transfers zero-shot across scales, families, and task domains, and end-to-end wall-clock latency drops by 46.5\% with sim5\% per-token overhead. Code is available at https://github.com/SaFo-Lab/ROM.

Deploying large language models for legal question answering raises challenges that general-purpose leaderboards do not capture, particularly for low-resource languages and under hard operational constraints. We report on building and operating a retrieval-augmented (RAG) legal assistant for Uzbek that must run in two regimes: a managed cloud service that maximizes answer quality within a per-token cost ceiling, and an on-premises deployment for clients whose legal data may not leave their infrastructure, restricting us to open-weight models on limited local hardware under latency constraints. Because no evaluation existed for this setting, we build two domain benchmarks: a retrieval benchmark of 178 expert-annotated legal queries with gold provision spans, and an end-to-end benchmark of 504 expert-curated question--answer pairs scored by an LLM judge whose ratings we validate against human judgments and against an independent-family judge. Applying these benchmarks under each regime, we find the open-versus-proprietary gap is small and cheaply closed by fine-tuning. Therefore, we train UTE-1, which is a state-of-the-art text embedder among open models for Uzbek. We also demonstrate that closing the performance gap via fine-tuning is both impractical due to the intensive hardware demands of long-context legal Q\&A and unnecessary, given that legal acts change frequently. We support this by reporting a negative result from a QLoRA experiment. We distill practical guidance for similar deployments, drawn from a system serving real users in production. We release our benchmarks, evaluation code and the fine-tuned embedder (UTE-1) https://metric-ai-lab.github.io/Uzbek-Legal-RAG/{at this https URL} to support future work on low-resource legal NLP.

Each LLM serving request goes through two phases. The first is prefill which processes the entire input prompt to produce one output token and the second is decode which generates the rest of output tokens, one-at-a-time. Prefill iterations have high latency but saturate GPU compute due to parallel processing of the input prompt. In contrast, decode iterations have low latency but also low compute utilization because a decode iteration processes only a single token per request. This makes batching highly effective for decodes and consequently for overall throughput. However, batching multiple requests leads to an interleaving of prefill and decode iterations which makes it challenging to achieve both high throughput and low latency. We introduce an efficient LLM inference scheduler Sarathi-Serve inspired by the techniques we originally proposed for optimizing throughput in Sarathi. Sarathi-Serve leverages chunked-prefills from Sarathi to create stall-free schedules that can add new requests in a batch without pausing ongoing decodes. Stall-free scheduling unlocks the opportunity to improve throughput with large batch sizes while minimizing the effect of batching on latency. Our evaluation shows that Sarathi-Serve improves serving throughput within desired latency SLOs of Mistral-7B by up to 2.6x on a single A100 GPU and up to 6.9x for Falcon-180B on 8 A100 GPUs over Orca and vLLM.

DistServe improves the performance of large language models (LLMs) serving by disaggregating the prefill and decoding computation. Existing LLM serving systems colocate the two phases and batch the computation of prefill and decoding across all users and requests. We find that this strategy not only leads to strong prefill-decoding interferences but also couples the resource allocation and parallelism plans for both phases. LLM applications often emphasize individual latency for each phase: time to first token (TTFT) for the prefill phase and time per output token (TPOT) of each request for the decoding phase. In the presence of stringent latency requirements, existing systems have to prioritize one latency over the other, or over-provision compute resources to meet both. DistServe assigns prefill and decoding computation to different GPUs, hence eliminating prefill-decoding interferences. Given the application's TTFT and TPOT requirements, DistServe co-optimizes the resource allocation and parallelism strategy tailored for each phase. DistServe also places the two phases according to the serving cluster's bandwidth to minimize the communication caused by disaggregation. As a result, DistServe significantly improves LLM serving performance in terms of the maximum rate that can be served within both TTFT and TPOT constraints on each GPU. Our evaluations show that on various popular LLMs, applications, and latency requirements, DistServe can serve 4.48x more requests or 10.2x tighter SLO, compared to state-of-the-art systems, while staying within latency constraints for > 90% of requests.

Autoregressive language models (ARMs) deliver strong likelihoods, but are inherently serial: they generate one token per forward pass, which limits throughput and inflates latency for long sequences. Diffusion Language Models (DLMs) parallelize across positions and thus appear promising for language generation, yet standard discrete diffusion typically needs hundreds to thousands of model evaluations to reach high quality, trading serial depth for iterative breadth. We introduce FS-DFM, Few-Step Discrete Flow-Matching. A discrete flow-matching model designed for speed without sacrificing quality. The core idea is simple: make the number of sampling steps an explicit parameter and train the model to be consistent across step budgets, so one big move lands where many small moves would. We pair this with a reliable update rule that moves probability in the right direction without overshooting, and with strong teacher guidance distilled from long-run trajectories. Together, these choices make few-step sampling stable, accurate, and easy to control. On language modeling benchmarks, FS-DFM with 8 sampling steps achieves perplexity parity with a 1,024-step discrete-flow baseline for generating 1,024 tokens using a similar-size model, delivering up to 128 times faster sampling and corresponding latency/throughput gains.

Looped language models repeatedly apply a weight-shared block to increase effective depth without increasing parameter count, but the resulting T sequential recurrent-block calls per generated token substantially increase decoding latency. To address the issue, we introduce Wavefront Decoding (WFD), a training-free self-speculative decoding framework designed for looped language models. WFD exploits two properties of these architectures: intermediate recurrence outputs provide effective draft predictions, and weight sharing allows token states at different positions and recurrence depths to be processed in one batched recurrent-block call. WFD organizes these mixed-depth states into a diagonal wavefront, continuously drafting new positions at shallow depth while advancing earlier positions toward full-depth verification. Unlike the phase-separated draft-then-verify schedule, WFD therefore concurrently batches drafting and verification within the same recurrent calls, while rejected drafts are corrected using full-depth predictions. Across six Spec-Bench task categories, WFD achieves 2.42x speedup on Ouro-2.6B and 3.54x on Huginn-3.5B over autoregressive decoding, consistently outperforming draft-then-verify. Cross-recurrence KV sharing further reduces wavefront KV traffic and increases WFD's speedup to 4.81x on Huginn-3.5B. The code is available at https://github.com/summerbro-hhj/wavefront-decoding.

Multi-agent applications often execute complex tasks as multi-stage workflows, where each stage is an LLM call whose output becomes part of context for subsequent steps. Existing LLM serving systems largely assume homogeneous clusters with identical model replicas. This design overlooks the potential of heterogeneous deployments, where models of different sizes and capabilities enable finer trade-offs between latency and performance. However, heterogeneity introduces new challenges in scheduling across models with diverse throughput and performance. We present Chimera, a predictive scheduling system for multi-agent workflow serving on heterogeneous LLM clusters that jointly improves end-to-end latency and task performance. Chimera applies semantic routing to estimate per-model confidence scores for each request, predicts the total remaining output length of the workflow, and estimates per-model congestion using in-flight predicted token volumes for load balancing. We evaluate Chimera on representative agentic workflows for code generation and math reasoning using multiple heterogeneous LLM configurations. Across comparable settings, Chimera traces the best latency-performance frontier, reducing end-to-end latency by 1.2--2.4times and improving task performance by 8.0-9.5 percentage points on average over competitive baselines including vLLM.

Unlike offline processing, streaming video vision-language models face two fundamental constraints: causality and accumulation. Causality prevents access to future frames that offline methods exploit, while accumulation causes tokens to grow unbounded, creating efficiency bottlenecks. However, existing approaches only regulate post-LLM kv-cache, leaving costly pre-LLM prefill unchanged. We introduce StreamingTOM, a training-free, plug-and-play two-stage framework that addresses both pre-LLM and post-LLM bottlenecks. Causal Temporal Reduction imposes a fixed per-frame budget and selects tokens based on adjacent-frame changes and token saliency, drastically reducing per-frame prefill cost by processing only a compact subset of visual tokens, ensuring predictable latency. Online Quantized Memory stores tokens in 4-bit format, retrieves relevant groups on demand, and dequantizes them, keeping the active kv-cache bounded regardless of stream length. Experiments demonstrate our method achieves 15.7times kv-cache compression ratio; compared to prior SOTA (LiveVLM), it delivers 1.2times lower peak memory and 2times faster TTFT. StreamingTOM achieves state-of-the-art accuracy among training-free methods with an average of 63.8% on offline benchmarks and 55.8% accuracy and 3.7 score on RVS. These results demonstrate that real-time streaming video understanding with bounded active memory is achievable without model retraining.

Efficient long-video understanding with vision-language models (VLMs) is often framed as selecting informative frames or visual tokens at a fixed native resolution. We show that per-frame resolution can instead be traded for denser temporal coverage, while front-end decoding latency depends on the size of the candidate pool rather than the final token budget. An empirical study across multiple VLMs and long-video benchmarks yields three findings: dense low-resolution sampling outperforms sparse native-resolution sampling at matched token budgets; resolution-sensitive tasks benefit from selected high-resolution frames; and front-end decoding dominates wall time for hour-long videos. Motivated by these findings, we introduce LoHi, a training-free, single-pass framework that combines a dense low-resolution video stream with sparse high-resolution image frames through the VLM's native video and image pathways. LoHi-Anchor selects high-resolution frames using codec I-frame metadata, while LoHi-SemDiv uses query relevance and visual diversity over CLIP features. Across three long-video benchmarks, LoHi improves average accuracy by 10.6 percentage points over the native-resolution baseline at a matched token budget and by 5.2 percentage points over the strongest prior efficiency method. It also reduces front-end decoding latency by up to 7x on hour-long videos. Project page: https://sixundong.com/projects/lohi

The autoregressive nature of large language models (LLMs) remains a significant bottleneck for inference, particularly in complex agentic workloads. While speculative decoding (SD) accelerates inference, current approaches rely on static drafting paradigms, utilising either autoregressive drafting models for reasoning or diffusion-based parallel drafting models for structured outputs. We empirically find that drafting accuracy fluctuates dramatically within a single sequence, leaving significant performance unrealised by static paradigms and coarse-grained routing. To address this volatility, we introduce WhiFlash, the first cross-paradigm SD method that unifies autoregressive and diffusion-based parallel drafting under a single token-level controller. WhiFlash adopts a fine-grained routing mechanism that employs either a lightweight entropy-based or a learned neural policy, both parametrised to provide a tunable balance between expected token gain and latency. To make high-frequency switching computationally viable, we introduce novel cache-management optimisations, Lazy Catch-up and KV-only Prefill, reducing switching overhead to below 7% of per-round latency. By capitalising on the complementary strengths of fundamentally distinct drafting architectures, WhiFlash achieves significantly higher acceptance lengths, yielding category-specific throughput gains of up to 69.6% over the state-of-the-art autoregressive EAGLE-3 and 37.3% over the diffusion-based DFlash.

Occluded tasks remain a bottleneck in robot manipulation. Existing solutions either deploy additional physical cameras requiring training-inference camera parity, or rely on explicit 3D reconstruction with high computational cost. Moreover, both approaches rely on standard agent-view and wrist-view observations, while failing to capture occlusion information and future scene evolution. To this end, we propose UniviewVLA, a unified multiview Vision-Language-Action model with world modeling, which infers multiview scene evolution for action prediction from only standard two-camera observations. We demonstrate that by leveraging generated multiview future views from the world model, UniviewVLA reveals occluded cues and models future scene evolution, improving action prediction and removing the need for extra hardware or explicit reconstruction. Besides, to accelerate inference while preserving prediction accuracy, UniviewVLA develops Motion-Informative Token Compression, which compresses each generated view from 625 to 16 tokens and reduces per-view latency from 6-7s to 0.2-0.3s. UniviewVLA also proposes training-free Action-Entropy View Selection, which dynamically identifies the most action-informative view at different inference stages. Extensive experiments show that UniviewVLA achieves 95.8% on LIBERO and 4.60 on CALVIN ABCD to D, both standard occlusion-free benchmarks. On customized occlusion-focused tasks, it improves success rate from 40.0% to 73.3%, and average real-robot success rate by 33.4 points, demonstrating stronger occlusion-focused performance without sacrificing standard occlusion-free benchmarks.

Large Language Models (LLMs) present a critical trade-off between inference quality and computational cost: larger models offer superior capabilities but incur significant latency, while smaller models are faster but less powerful. Existing serving strategies often employ fixed model scales or static two-stage speculative decoding, failing to dynamically adapt to the varying complexities of user requests or fluctuations in system performance. This paper introduces , a novel framework that reimagines LLM inference as an adaptive routing problem solved through multi-level speculative decoding. dynamically constructs and optimizes inference "paths" (chains of models) based on real-time feedback, addressing the limitations of static approaches. Our contributions are threefold: (1) An adaptive model chain scheduling mechanism that leverages performance profiling (execution times) and predictive similarity metrics (derived from token distribution divergence) to continuously select the optimal sequence of draft and verifier models, minimizing predicted latency per generated token. (2) A multi-level collaborative verification framework where intermediate models within the selected chain can validate speculative tokens, reducing the verification burden on the final, most powerful target model. (3) A synchronized state management system providing efficient, consistent KV cache handling across heterogeneous models in the chain, including precise, low-overhead rollbacks tailored for asynchronous batch processing inherent in multi-level speculation. Preliminary experiments demonstrate the validity of our method.

Video understanding has rapidly evolved toward video large language models (VideoLLMs): systems that couple video representations with pretrained large language models and condition generation on a textual prompt. Their strong performance on captioning, question answering, retrieval and temporal grounding comes at a computation and memory cost that grows with frame count and context length, limiting deployment in real-time, mobile and resource-constrained settings. This survey covers inference-efficiency mechanisms for visual and audiovisual VideoLLMs that report concrete reductions in parameter count, FLOPs per input, latency, memory, or visual and audio token count. We analyze bottlenecks across frame sampling, modality encoding, connector-level token reduction, and LLM prefilling and decoding. We organize methods by the pipeline stage at which they act, covering VideoLLMs developed since late 2022 together with earlier frame-sampling and vision-encoder mechanisms that remain components of current pipelines. We assemble literature-reported accuracy--cost comparisons under shared host models and input protocols wherever available, distinguish them from heterogeneous cross-paper evidence, and identify gaps in audiovisual efficiency and standardized evaluation. We maintain a repository at https://github.com/momentslab/awesome-efficient-videollm.

Multi-token generation has emerged as a promising paradigm for accelerating transformer-based large model inference. Recent efforts primarily explore diffusion Large Language Models (dLLMs) for parallel decoding to reduce inference latency. To achieve AR-level generation quality, many techniques adapt AR models into dLLMs to enable parallel decoding. However, they suffer from limited speedup compared to AR models due to a pretrain-to-posttrain mismatch. Specifically, the masked data distribution in post-training deviates significantly from the real-world data distribution seen during pretraining, and dLLMs rely on bidirectional attention, which conflicts with the causal prior learned during pretraining and hinders the integration of exact KV cache reuse. To address this, we introduce Jacobi Forcing, a progressive distillation paradigm where models are trained on their own generated parallel decoding trajectories, smoothly shifting AR models into efficient parallel decoders while preserving their pretrained causal inference property. The models trained under this paradigm, Jacobi Forcing Model, achieves 3.8x wall-clock speedup on coding and math benchmarks with minimal loss in performance. Based on Jacobi Forcing Models' trajectory characteristics, we introduce multi-block decoding with rejection recycling, which enables up to 4.5x higher token acceptance count per iteration and nearly 4.0x wall-clock speedup, effectively trading additional compute for lower inference latency. Our code is available at https://github.com/hao-ai-lab/JacobiForcing.

Public leaderboards for coding agents typically rank systems by model name and pass rate, while the surrounding harness (the scaffold that issues tools, manages context, and decides when to stop) is often under-specified. Model-to-model comparison is valid when the harness is fixed; when it varies, performance and efficiency conflate model and scaffold effects. We evaluate Qwen 3.6 Plus and MiniMax M2.5 across three open-source harnesses (Goose, OpenCode, OpenHands-SDK) on a stratified 50-task subset of Terminal-Bench Pro. Harness choice induces up to a 40x difference in tokens per solved task, while paired within-model pass-rate differences remain 0-8 percentage points (95% paired-task bootstrap CIs include zero except for the largest gap). Failure fingerprints replicate across models (REASON for Goose, VERIFY/MAX_TURNS for OpenHands-SDK, idle-loop/TIME for OpenCode), indicating harness-level biases that are largely model-independent. For human-centered coding-agent evaluation, model name alone is an incomplete comparison unit: harness-model pairs determine real-world cost, latency, and oversight burden; no-action turns are a per-task wait tax, not just a token tax. We therefore recommend selecting harness-model pairs by pass rate under token/latency budgets, and reporting token usage, latency, and full harness specifications alongside any model comparison. We release anonymized configs, raw trial logs, aggregated snapshots, and analysis scripts.

We present RAGMark, a modular benchmarking framework for advanced Retrieval-Augmented Generation (RAG) systems targeting small-scale multi-GPU environments. RAGMark evaluates diverse RAG components, including retrievers, vector databases, prompt-processing methods, and generator models, while collecting detailed per-stage metrics such as latency, GPU utilization, memory consumption, power usage, time to first token (TTFT), throughput, and answer quality. The framework is highly extensible, separating RAG stages, timing, and resource monitoring into modular components, and is designed to efficiently sweep large configuration spaces while minimizing repeated model and database initialization overhead. Using RAGMark, we characterize five RAG workloads on open-domain QA datasets across varying retrieval depths, model scales, reranking, compression methods, and vector database configurations. We show that while autoregressive generation dominates latency in naive pipelines, context-reduction techniques shift bottlenecks across compute, memory bandwidth, and preprocessing stages. Reranking and compression produce compounding benefits: reranking reduces compression workload itself, while both jointly reduce prefill and KV-cache traversal costs, lowering energy consumption by up to 66%. We further observe strong cross-stage interactions, where small upstream context reductions cascade through downstream latency, memory traffic, and energy consumption. The RAGMark source code is publicly available at: https://github.com/zferic/RAGMark.

Mixture-of-experts models make nearly trillion-parameter capacity accessible with sparse per-token computation, provided that the serving system can distribute the weights and coordinate their execution. We present Cascadia's resident execution of Inkling, a 975B-total/41B-active-parameter model, on eleven Intel Core Ultra X7 358H AI PCs, each with 64 GB of memory, Arc B390 integrated graphics and gigabit Ethernet. We contribute a custom resident MoE engine that preserves Inkling's routing rules, constructs compressed graphs for OpenVINO's fused iGPU primitives, and coordinates FP16 expert computation with FP32 output restoration. The engine fits six consecutive decoder layers per machine and represents dense feed-forward blocks as all-active expert slices, reducing measured dense-layer call time from approximately 8.1 to 4.5 ms. A streaming pipeline coordinates concurrent generation, while captured-state draft evaluation measures agreement with the deployed numerical path. Paired measurements at fifteen concurrency levels from 1 to 176 streams reach 60.29 aggregate decode tokens/s at 88 streams, with 46.87 tokens/s over the complete serving phases. At fifteen streams, median first-token latency is 6.05 s. Raising the context budget from the 1,024-position default, real prompts of 1k to 64k tokens recover the embedded code in all 19 measured answers, with first-token time growing as aN+bN^2 and decode latency growing approximately linearly, both bounded by a single-threaded CPU attention loop rather than by memory, which holds 512k positions per stream. Evaluation on captured fleet states separates the effects of vocabulary selection and weight quantization on draft agreement. Together, these contributions establish an execution and evaluation approach for large sparse models on distributed client systems with shared CPU-GPU memory.

Two widely adopted techniques for LLM inference serving systems today are hybrid batching and disaggregated serving. A hybrid batch combines prefill and decode tokens of different requests in the same batch to improve resource utilization and throughput at the cost of increased latency per token. In contrast, disaggregated serving decouples compute-bound prefill and bandwidth-bound decode phases to optimize for service level objectives (SLOs) at the cost of resource under-utilization and KV-cache transfer overheads. To address the limitations of these techniques, we propose RAPID-Serve: a technique to concurrently execute prefill and decode on the same GPU(s) to meet latency SLOs while maintaining high throughput and efficient resource utilization. Furthermore, we propose Adaptive Resource Management for runtime compute resource allocation, optionally leveraging CU masking (a fine-grained Compute Unit partitioning feature on AMD InstinctTM GPUs). RAPID-Serve provides up to 4.1x (average 1.7x) unconstrained throughput improvement and 32x and higher (average 4.9x) throughput improvement under SLO constraints, showing it as an effective strategy compared to the state-of-the-art approaches, particularly in resource-constrained environments.

Low-rank adaptation (LoRA) has become an important and popular method to adapt pre-trained models to specific domains. We present Punica, a system to serve multiple LoRA models in a shared GPU cluster. Punica contains a new CUDA kernel design that allows batching of GPU operations for different LoRA models. This allows a GPU to hold only a single copy of the underlying pre-trained model when serving multiple, different LoRA models, significantly enhancing GPU efficiency in terms of both memory and computation. Our scheduler consolidates multi-tenant LoRA serving workloads in a shared GPU cluster. With a fixed-sized GPU cluster, our evaluations show that Punica achieves 12x higher throughput in serving multiple LoRA models compared to state-of-the-art LLM serving systems while only adding 2ms latency per token. Punica is open source at https://github.com/punica-ai/punica .

Commercial large language models bill, scale latency, and budget context per token. Yet tokenizers assign more subword tokens to the same meaning in some languages than in others, so speakers of languages with high token-fertility pay a structural penalty before a model is ever invoked. This penalty is documented for multilingual settings in general, but it has not been measured systematically for African languages at the level of enterprise deployment economics and cognitive context capacity. We measure it across 20 African languages spanning five language families and three scripts (Latin, Ge'ez/Ethiopic, N'Ko; 19 appear in the primary FLORES-200+ corpus, with Nigerian Pidgin measured via MAFAND-MT only), using parallel corpora so that the language effect is isolated from content. Across 11 frontier and open tokenizers on FLORES-200+, every African language carries a tokenization premium above English (median 1.88x on GPT-5 / o200k_base, up to 8.92x for N'Ko); the penalty is largest for Ethiopic and N'Ko scripts (reaching 7-9x) and is near-invariant across corpora (FLORES vs SIB-200 Pearson r = 0.9998). Translated into deployment terms, this results in up to 8.9x inference cost and an equivalent generation-latency multiplier (N'Ko vs English on GPT-5; 7.4x for Amharic), and as little as 11% of English's effective context window. The best currently available tokenizer for African languages, Gemma 4, reduces the mean premium from 3.31x (cl100k_base) to 2.38x, but no tokenizer eliminates the penalty. We release an open measurement tool (afri-fertility), a public leaderboard, a results dataset, and mitigation guidance for African builders. The penalty falls hardest on the languages whose speakers can least afford it, a digital divide encoded directly into the subword vocabulary.

Sparse Mixture of Expert (SMoE) models have emerged as a scalable alternative to dense models in language modeling. These models use conditionally activated feedforward subnetworks in transformer blocks, allowing for a separation between total model parameters and per-example computation. However, large token-routed SMoE models face a significant challenge: during inference, the entire model must be used for a sequence or a batch, resulting in high latencies in a distributed setting that offsets the advantages of per-token sparse activation. Our research explores task-specific model pruning to inform decisions about designing SMoE architectures, mainly modulating the choice of expert counts in pretraining. We investigate whether such pruned models offer advantages over smaller SMoE models trained from scratch, when evaluating and comparing them individually on tasks. To that end, we introduce an adaptive task-aware pruning technique UNCURL to reduce the number of experts per MoE layer in an offline manner post-training. Our findings reveal a threshold pruning factor for the reduction that depends on the number of experts used in pretraining, above which, the reduction starts to degrade model performance. These insights contribute to our understanding of model design choices when pretraining with SMoE architectures, particularly useful when considering task-specific inference optimization for later stages.

ModeSwitch-LLM is a lightweight request-boundary controller for improving single-GPU large language model inference efficiency by routing each request to an appropriate fixed inference mode. Instead of relying on one static serving configuration, the system selects among FP16, quantized modes, speculative decoding, and hybrid modes such as GPTQ plus prefix caching and INT8 plus continuous batching using cheap workload-level features. We evaluate ModeSwitch-LLM on Meta-Llama-3.1-8B-Instruct served on a single NVIDIA A100 GPU. On deployment-style synthetic workloads, the online controller achieves a 2.10x mean latency speedup over FP16 and a 0.48x mean energy ratio, corresponding to 51.7% lower energy per token. On automatic benchmarks used as a quality gate, accuracy remains close to FP16 with a mean delta of +0.17 percentage points. We also evaluate lightweight learned routers, but find that they do not clearly outperform the rule-based controller because they add routing overhead and more often select modes that violate quality, energy, or memory constraints. These results show that simple request-aware routing can recover substantial efficiency from existing inference modes without retraining the model or changing its architecture.

Reasoning LLMs produce longer outputs, requiring speculative decoding drafters trained on extended sequences. Parallel drafting - predicting multiple tokens per forward pass - offers latency benefits over sequential generation, but training complexity scales quadratically with the product of sequence length and parallel positions, rendering long-context training impractical. We present P(arallel)-EAGLE, which transforms EAGLE from autoregressive to parallel multi-token prediction via a learnable shared hidden state. To scale training to long contexts, we develop a framework featuring attention mask pre-computation and sequence partitioning techniques, enabling gradient accumulation within individual sequences for parallel-prediction training. We implement P-EAGLE in vLLM and demonstrate speedups of 1.10-1.36x over autoregressive EAGLE-3 across GPT-OSS 120B, 20B, and Qwen3-Coder 30B.

We introduce a new tokenizer for language models that minimizes the average tokens per character, thereby reducing the number of tokens needed to represent text during training and to generate text during inference. Our method, which we refer to as the Length-MAX tokenizer, obtains its vocabulary by casting a length-weighted objective maximization as a graph partitioning problem and developing a greedy approximation algorithm. On FineWeb and diverse domains, it yields 14--18\% fewer tokens than Byte Pair Encoding (BPE) across vocabulary sizes from 10K to 50K, and the reduction is 13.0\% when the size is 64K. Training GPT-2 models at 124M, 355M, and 1.3B parameters from scratch with five runs each shows 18.5\%, 17.2\%, and 18.5\% fewer steps, respectively, to reach a fixed validation loss, and 13.7\%, 12.7\%, and 13.7\% lower inference latency, together with a 16\% throughput gain at 124M, while consistently improving on downstream tasks including reducing LAMBADA perplexity by 11.7\% and enhancing HellaSwag accuracy by 4.3\%. Moreover, the Length-MAX tokenizer achieves 99.62\% vocabulary coverage and the out-of-vocabulary rate remains low at 0.12\% on test sets. These results demonstrate that optimizing for average token length, rather than frequency alone, offers an effective approach to more efficient language modeling without sacrificing -- and often improving -- downstream performance. The tokenizer is compatible with production systems and reduces embedding and KV-cache memory by 18\% at inference.

Speculative decoding accelerates LLM inference by using a draft model to look ahead, but gains are capped by the cost of autoregressive draft generation: increasing draft size elevates acceptance rates but introduces additional latency overhead exacerbating the speed-accuracy tradeoff. Prior methods (Medusa, Hydra, EAGLE) partially reduce draft cost but either degrade acceptance or introduce overheads that limit scaling. We present Mirror Speculative Decoding (Mirror-SD), an inference algorithm that breaks the latency-acceptance tradeoff. Mirror-SD launches branch-complete rollouts from early-exit signals in parallel with the target model's suffix and explicitly maps computation across heterogeneous accelerators (GPU and NPU) to exploit cross-device parallelism. The draft speculates forward continuations for the target to verify, while the target simultaneously speculates correction paths for the draft, converting speculation into two complementary execution pipelines. To further cut draft latency without weakening acceptance semantics, we add speculative streaming so the draft emits multiple tokens per step. This dual strategy of parallel heterogeneous execution plus multi-token speculative streaming pushes speculative decoding toward its ideal regime of high acceptance with low overhead. On SpecBench with server-scale models from 14B to 66B parameters, Mirror-SD delivers consistent end-to-end gains, achieving 2.8x-5.8x wall-time speedups across diverse tasks and a 30% average relative improvement over the strongest baseline, EAGLE3.

Large transformer-based models have significant potential for speech transcription and translation. Their self-attention mechanisms and parallel processing enable them to capture complex patterns and dependencies in audio sequences. However, this potential comes with challenges, as these large and computationally intensive models lead to slow inference speeds. Various optimization strategies have been proposed to improve performance, including efficient hardware utilization and algorithmic enhancements. In this paper, we introduce Whisper-Medusa, a novel approach designed to enhance processing speed with minimal impact on Word Error Rate (WER). The proposed model extends the OpenAI's Whisper architecture by predicting multiple tokens per iteration, resulting in a 50% reduction in latency. We showcase the effectiveness of Whisper-Medusa across different learning setups and datasets.

A tokenizer fixed at the start of pre-training allocates vocabulary in proportion to the pre-training corpus, reflecting the deployment priorities at that time. When those priorities shift, languages added later are split into many more tokens per word, which can raise latency, compute, and energy consumption for users of those languages. Cloud models can afford a broad vocabulary because the embedding and LM-head matrices are a small fraction of their parameters. On a compact model those matrices are a material share of per-token decode bandwidth, so on-device models ship small vocabularies and accept fragmentation outside a fixed language set. We present tokenizer expansion, an in-place recipe for upgrading a pre-trained model's tokenizer when the model producer controls its design. We continue the existing tokenizer's BPE merges on a multilingual corpus, so most source tokens carry over unchanged as single tokens and every new token has an exact decomposition into source tokens. We copy the carried-over embedding rows unchanged and initialize new rows as the mean of their source sub-token embeddings. A two-stage adaptation, embedding-only training then full-model continued pre-training, recovers source-checkpoint quality. We apply the recipe to a continued pre-trained checkpoint of LFM2-8B-A1B, an 8B-parameter Mixture-of-Experts model, to help produce LFM2.5-8B-A1B with a 128K tokenizer. The expanded tokenizer encodes Hindi and Vietnamese in roughly 2.4times and 2.6times fewer tokens than the source (up to 4.0times on Thai). Combining these reductions with the measured per-token cost of the larger vocabulary, we estimate a 2.2-3.7times per-character decode speedup for these languages across our reference devices. We release the model weights and the expanded tokenizer, and report the negative findings that shaped the recipe.

Vision-Language Models (VLMs) have shown strong promise on Optical Character Recognition (OCR), yet the sheer number of visual tokens required to encode dense documents incurs prohibitive inference cost. Existing pruning methods rely on physical eviction, e.g., permanently discarding visual tokens during the prefill stage. While effective for natural images, this strategy fundamentally breaks down on OCR, where virtually every visual token may correspond to a character or structural element, and any irreversible loss leads to catastrophic accuracy degradation. We observe that, although document images appear globally dense and seemingly unprunable, the model's attention to them is in fact temporally sparse: at each decoding step it concentrates on a small region that shifts gradually across steps, much as a human reader fixates on successive words rather than perceiving an entire page at once. Motivated by this Dynamic Visual Fixation phenomenon, we recast the intractable global pruning problem as a tractable local, dynamic one and propose FastOCR, a training-free framework with two complementary modules. Specifically, Focal-Guided Pruning identifies a small set of focal layers and selects the most task-relevant visual tokens from them at each step, while Cross-Step Fixation Reuse exploits the gradual shift of fixation to warm-start each step from the previous one. By dynamically adjusting which tokens are attended rather than evicting any from the cache, FastOCR avoids permanent information loss. Extensive experiments show that FastOCR serves as a plug-and-play acceleration module, generalizing consistently across five VLMs of varying sizes and architectures. On Qwen2.5-VL, FastOCR retains 98% of the unpruned model's accuracy while attending to only 5% of the visual tokens per decoding step, reducing attention latency by 3.0times.

Fixed-cardinality retrieval injects a constant top-K chunks into the generator regardless of query complexity, causing over-retrieval for narrow queries and under-retrieval for compositional ones. We describe ScoreGate, a lightweight score-space decision mechanism that controls retrieval cardinality at inference time using two scores already produced by the standard pipeline: bi-encoder similarity s_i and cross-encoder reranker score r_i, with no additional model inference calls required. Its core insight is that cross-encoder affirmation can rescue semantically relevant chunks that bi-encoder retrieval ranks poorly due to vocabulary mismatch -- a failure mode unaddressed by fixed-K or single-score thresholding. On MS MARCO (200 dev queries), ScoreGate achieves MRR@10 = 0.401 with 35% fewer retained chunks than Standard Top-K. On an internal benchmark (n=300, Fleiss' kappa=0.87), ScoreGate observed zero false positives (95% CI [96.4%, 100%]) at 97.77-99.34% recall, with 34.8% fewer tokens per query and only 31ms added latency. Results on both MS MARCO and real-world production traffic suggest that adaptive retrieval cardinality can improve retrieval efficiency without degrading retrieval quality.

Latency-critical speech applications (e.g., live transcription, voice commands, and real-time translation) demand low time-to-first-token (TTFT) and high transcription accuracy, particularly on resource-constrained edge devices. Full-attention Transformer encoders remain a strong accuracy baseline for automatic speech recognition (ASR) because every frame can directly attend to every other frame, which resolves otherwise locally ambiguous acoustics using distant lexical context. However, this global dependency incurs quadratic complexity in sequence length, inducing an inherent "encode-the-whole-utterance" latency profile. For streaming use cases, this causes TTFT to grow linearly with utterance length as the encoder must process the entire prefix before any decoder token can be emitted. To better meet the needs of on-device, streaming ASR use cases we introduce Moonshine v2, an ergodic streaming-encoder ASR model that employs sliding-window self-attention to achieve bounded, low-latency inference while preserving strong local context. Our models achieve state of the art word error rates across standard benchmarks, attaining accuracy on-par with models 6x their size while running significantly faster. These results demonstrate that carefully designed local attention is competitive with the accuracy of full attention at a fraction of the size and latency cost, opening new possibilities for interactive speech interfaces on edge devices.

Test-Time Scaling (TTS) has proven effective in improving the performance of Large Language Models (LLMs) during inference. However, existing research has overlooked the efficiency of TTS from a latency-sensitive perspective. Through a latency-aware evaluation of representative TTS methods, we demonstrate that a compute-optimal TTS does not always result in the lowest latency in scenarios where latency is critical. To address this gap and achieve latency-optimal TTS, we propose two key approaches by optimizing the concurrency configurations: (1) branch-wise parallelism, which leverages multiple concurrent inference branches, and (2) sequence-wise parallelism, enabled by speculative decoding. By integrating these two approaches and allocating computational resources properly to each, our latency-optimal TTS enables a 32B model to reach 82.3% accuracy on MATH-500 within 1 minute and a smaller 3B model to achieve 72.4% within 10 seconds. Our work emphasizes the importance of latency-aware TTS and demonstrates its ability to deliver both speed and accuracy in latency-sensitive scenarios.

Efficient parallelization of Large Language Models (LLMs) with long sequences is essential but challenging due to their significant computational and memory demands, particularly stemming from communication bottlenecks in attention mechanisms. While sequence parallelism (SP) has been introduced as a potential solution, existing methods often suffer from limited scalability or inefficiency, rendering their effectiveness. Ring-Attention demonstrates the potential for scaling sequence processing but faces significant limitations due to its reliance on peer-to-peer (P2P) communication and inefficient utilization of network resources. As the degree of SP increases, the quadratic decrease in computation time per step contrasts sharply with the linear reduction in communication volume, exacerbating communication bottlenecks. To address these challenges, we propose TokenRing, a fine-grained parallel framework that leverages bidirectional P2P communication to effectively overlap computation and data transmission. By partitioning the attention block and concurrently transmitting Query and block outputs (i.e., block_out and block_lse) within a fully connected mesh topology, TokenRing achieves significant reductions in communication overhead and better load balancing. These innovations improve the scalability and efficiency of distributed Transformer models, particularly for long-context sequences. Experimental results demonstrate that TokenRing enhances throughput and reduces communication latency. Moreover, its design adapts seamlessly to various multi-GPU interconnect solutions, such as Huawei Ascend, ensuring broad compatibility and cost-effectiveness for distributed LLM inference and training. The code is available at: https://github.com/ACA-Lab-SJTU/token-ring.

In this paper we introduce token time continuous diffusion (TTCD), a new diffusion language model which (a) operates in continuous space, deterministically mapping Gaussian noise to a final token canvas with no further sampling, and crucially (b) incorporates a new notion of per-token times, with some tokens proceeding from noise to token at a faster rate than others. Continuous space modeling helps TTCD avoid the parallel sampling of multiple tokens, which is a key source of inaccuracy at high speedups for models that iterate purely in discrete space. The notion of per-token times helps TTCD to better model conditional generation, allows for more sure tokens to proceed at a faster rate, and allows for differentiated inter-token influences during refinement. TTCD outperforms discrete models at high speedups. We train a 160M parameter TTCD model on OpenWebText, and then self-distill it; we find that at high speedups we are comparable in unconditional generation quality, and outperform in conditional generation, several existing models of similar size trained, on the same data, and self-distilled. We achieve similar gains in Sudoku solving as well.

Diffusion language models (DLMs) enable fast generation by predicting multiple tokens in parallel, but their practical adoption remains limited by a persistent quality gap relative to comparably sized autoregressive (AR) models. We attribute this gap to a computation-difficulty mismatch: within a partially observed sequence, some unknown tokens are easy to predict, while others require substantially more computation. Existing DLMs nevertheless apply uniform computational depth to all unknown positions at each denoising step. We introduce ALoDLM, which replaces uniform computation with token-adaptive latent recurrence. At each denoising step, ALoDLM iteratively refines latent representations and allocates computation according to token difficulty. Tokens ready to commit are fed back as discrete context, while unresolved tokens retain and further refine their latent states through additional recurrent passes. To learn token prediction and computation allocation jointly, we formulate token-wise computation schedules as latent variables and derive a conditional negative evidence lower bound (NELBO). We train ALoDLM at 1.7B and 8B parameter scales. Across eleven benchmarks, ALoDLM outperforms all evaluated DLMs and the corresponding AR baselines in average benchmark score at both scales. ALoDLM also retains fast parallel decoding, yielding a strong quality-efficiency trade-off among evaluated autoregressive and diffusion models under optimized inference engines.

The deployment and scaling of large language models (LLMs) have become critical as they permeate various applications, demanding high-throughput and low-latency serving systems. Existing frameworks struggle to balance these requirements, especially for workloads with long prompts. This paper introduces DeepSpeed-FastGen, a system that employs Dynamic SplitFuse, a novel prompt and generation composition strategy, to deliver up to 2.3x higher effective throughput, 2x lower latency on average, and up to 3.7x lower (token-level) tail latency, compared to state-of-the-art systems like vLLM. We leverage a synergistic combination of DeepSpeed-MII and DeepSpeed-Inference to provide an efficient and easy-to-use serving system for LLMs. DeepSpeed-FastGen's advanced implementation supports a range of models and offers both non-persistent and persistent deployment options, catering to diverse user scenarios from interactive sessions to long-running applications. We present a detailed benchmarking methodology, analyze the performance through latency-throughput curves, and investigate scalability via load balancing. Our evaluations demonstrate substantial improvements in throughput and latency across various models and hardware configurations. We discuss our roadmap for future enhancements, including broader model support and new hardware backends. The DeepSpeed-FastGen code is readily available for community engagement and contribution.

With the development of large language models (LLMs), the ability to handle longer contexts has become a key capability for Web applications such as cross-document understanding and LLM-powered search systems. However, this progress faces two major challenges: performance degradation due to sequence lengths out-of-distribution, and excessively long inference times caused by the quadratic computational complexity of attention. These issues hinder the application of LLMs in long-context scenarios. In this paper, we propose Dynamic Token-Level KV Cache Selection (TokenSelect), a model-agnostic, training-free method for efficient and accurate long-context inference. TokenSelect builds upon the observation of non-contiguous attention sparsity, using Query-Key dot products to measure per-head KV Cache criticality at token-level. By per-head soft voting mechanism, TokenSelect selectively involves a small number of critical KV cache tokens in the attention calculation without sacrificing accuracy. To further accelerate TokenSelect, we designed the Selection Cache based on observations of consecutive Query similarity and implemented efficient dot product kernel, significantly reducing the overhead of token selection. A comprehensive evaluation of TokenSelect demonstrates up to 23.84x speedup in attention computation and up to 2.28x acceleration in end-to-end latency, while providing superior performance compared to state-of-the-art long-context inference methods.

Efficient deployment of small language models (SLMs) is essential for numerous real-world applications with stringent latency constraints. While previous work on SLM design has primarily focused on reducing the number of parameters to achieve parameter-optimal SLMs, parameter efficiency does not necessarily translate into proportional real-device speed-ups. This work aims to identify the key determinants of SLMs' real-device latency and offer generalizable principles and methodologies for SLM design and training when real-device latency is the primary consideration. Specifically, we identify two central architectural factors: depth-width ratios and operator choices. The former is crucial for small-batch-size latency, while the latter affects both latency and large-batch-size throughput. In light of this, we first study latency-optimal depth-width ratios, with the key finding that although deep-thin models generally achieve better accuracy under the same parameter budget, they may not lie on the accuracy-latency trade-off frontier. Next, we explore emerging efficient attention alternatives to evaluate their potential as candidate building operators. Using the identified promising operators, we construct an evolutionary search framework to automatically discover latency-optimal combinations of these operators within hybrid SLMs, thereby advancing the accuracy-latency frontier. In addition to architectural improvements, we further enhance SLM training using a weight normalization technique that enables more effective weight updates and improves final convergence. Combining these methods, we introduce a new family of hybrid SLMs, called Nemotron-Flash, which significantly advances the accuracy-efficiency frontier of state-of-the-art SLMs, e.g., achieving over +5.5% average accuracy, 1.3x/1.9x lower latency, and 18.7x/45.6x higher throughput compared to Qwen3-1.7B/0.6B, respectively.

Scheduling policies in large-scale Automatic Speech Recognition (ASR) serving pipelines play a key role in determining end-to-end (E2E) latency. Yet, widely used serving engines rely on first-come-first-served (FCFS) scheduling, which ignores variability in request duration and leads to head-of-line blocking under workload drift. We show that audio duration is an accurate proxy for job processing time in ASR models such as Whisper, and use this insight to enable duration-aware scheduling. We integrate two classical algorithms, Shortest Job First (SJF) and Highest Response Ratio Next (HRRN), into vLLM and evaluate them under realistic and drifted workloads. On LibriSpeech test-clean, compared to baseline, SJF reduces median E2E latency by up to 73% at high load, but increases 90th-percentile tail latency by up to 97% due to starvation of long requests. HRRN addresses this trade-off: it reduces median E2E latency by up to 28% while bounding tail-latency degradation to at most 24%. These gains persist under workload drift, with no throughput penalty and <0.1\,ms scheduling overhead per request.

Recent work in speech-to-speech translation (S2ST) has focused primarily on offline settings, where the full input utterance is available before any output is given. This, however, is not reasonable in many real-world scenarios. In latency-sensitive applications, rather than waiting for the full utterance, translations should be spoken as soon as the information in the input is present. In this work, we introduce a system for simultaneous S2ST targeting real-world use cases. Our system supports translation from 57 languages to English with tunable parameters for dynamically adjusting the latency of the output -- including four policies for determining when to speak an output sequence. We show that these policies achieve offline-level accuracy with minimal increases in latency over a Greedy (wait-k) baseline. We open-source our evaluation code and interactive test script to aid future SimulS2ST research and application development.

Recent advances have demonstrated the potential of decoderonly large language models (LLMs) for automatic speech recognition (ASR). However, enabling streaming recognition within this framework remains a challenge. In this work, we propose a novel streaming ASR approach that integrates a read/write policy network with monotonic chunkwise attention (MoChA) to dynamically segment speech embeddings. These segments are interleaved with label sequences during training, enabling seamless integration with the LLM. During inference, the audio stream is buffered until the MoChA module triggers a read signal, at which point the buffered segment together with the previous token is fed into the LLM for the next token prediction. We also introduce a minimal-latency training objective to guide the policy network toward accurate segmentation boundaries. Furthermore, we adopt a joint training strategy in which a non-streaming LLM-ASR model and our streaming model share parameters. Experiments on the AISHELL-1 and AISHELL-2 Mandarin benchmarks demonstrate that our method consistently outperforms recent streaming ASR baselines, achieving character error rates of 5.1% and 5.5%, respectively. The latency optimization results in a 62.5% reduction in average token generation delay with negligible impact on recognition accuracy

Per-ticker forecasting models dominate financial time-series work yet remain blind to cross-company propagation: a foundry disruption in Taiwan does not register in a single-asset model until Apple's own price has already moved. To address this limitation, we introduce a heterogeneous Rust-Python streaming architecture that maps cross-company attention as a continuous-time graph driven directly from text. We show that on the ingestion side, a zero-copy Rust edge parses news records in sim100 ns and scans the target equity universe in sim1.2 μs. On the inference end, a multivariate Neural Hawkes Process featuring per-node continuous-time LSTM states and a bilinear latent projection propagates directed excitation, while an adaptive pruning rule bounds the computational cost of dynamic neighborhood updates. Combining these stages, we demonstrate an end-to-end processing latency of sim13 ms per incoming news record on a single commodity CPU. Evaluated on a one-month temporal holdout of the FNSPID corpus (638 articles across 47 tickers), the system delivers a 1.70times precision lift over random at the 90th-percentile next-day return threshold, and 3.36times over a same-sector baseline. Crucially, removing the graph topology collapses precision to zero, confirming that the dynamic attention network is the sole driver of cross-company signal in this architecture.

Autoregressive (AR) language models generate text one token at a time, even when consecutive tokens are highly predictable given earlier context. We introduce MARS (Mask AutoRegreSsion), a lightweight fine-tuning method that teaches an instruction-tuned AR model to predict multiple tokens per forward pass. MARS adds no architectural modifications, no extra parameters, and produces a single model that can still be called exactly like the original AR model with no performance degradation. Unlike speculative decoding, which maintains a separate draft model alongside the target, or multi-head approaches such as Medusa, which attach additional prediction heads, MARS requires only continued training on existing instruction data. When generating one token per forward pass, MARS matches or exceeds the AR baseline on six standard benchmarks. When allowed to accept multiple tokens per step, it maintains baseline-level accuracy while achieving 1.5-1.7x throughput. We further develop a block-level KV caching strategy for batch inference, achieving up to 1.71x wall-clock speedup over AR with KV cache on Qwen2.5-7B. Finally, MARS supports real-time speed adjustment via confidence thresholding: under high request load, the serving system can increase throughput on the fly without swapping models or restarting, providing a practical latency-quality knob for deployment.

Fast Automatic Speech Recognition (ASR) is critical for latency-sensitive applications such as real-time captioning and meeting transcription. However, truly parallel ASR decoding remains challenging due to the sequential nature of autoregressive (AR) decoders and the context limitations of non-autoregressive (NAR) methods. While modern ASR encoders can process up to 30 seconds of audio at once, AR decoders still generate tokens sequentially, creating a latency bottleneck. We propose Whisfusion, the first framework to fuse a pre-trained Whisper encoder with a text diffusion decoder. This NAR architecture resolves the AR latency bottleneck by processing the entire acoustic context in parallel at every decoding step. A lightweight cross-attention adapter trained via parameter-efficient fine-tuning (PEFT) bridges the two modalities. We also introduce a batch-parallel, multi-step decoding strategy that improves accuracy by increasing the number of candidates with minimal impact on speed. Fine-tuned solely on LibriSpeech (960h), Whisfusion achieves a lower WER than Whisper-tiny (8.3% vs. 9.7%), and offers comparable latency on short audio. For longer utterances (>20s), it is up to 2.6x faster than the AR baseline, establishing a new, efficient operating point for long-form ASR. The implementation and training scripts are available at https://github.com/taeyoun811/Whisfusion.

Most vision-language models (VLMs) apply a large language model (LLM) as the decoder, where the response tokens are generated sequentially through autoregression. Therefore, the number of output tokens can be the bottleneck of the end-to-end latency. However, different models may require vastly different numbers of output tokens to achieve comparable performance. In this work, we conduct a comprehensive analysis of the latency across different components of VLMs on simulated data. The experiment shows that a large model with fewer output tokens can be more efficient than a small model with a long output sequence. The empirical study on diverse real-world benchmarks confirms the observation that a large model can achieve better or comparable performance as a small model with significantly fewer output tokens. To leverage the efficiency of large models, we propose a multi-agent inference framework that keeps large models with short responses but transfers the key reasoning tokens from the small model when necessary. The comparison on benchmark tasks demonstrates that by reusing the reasoning tokens from small models, it can help approach the performance of a large model with its own reasoning, which confirms the effectiveness of our proposal.

The quadratic complexity of attention remains the central bottleneck in long-context inference for large language models. Prior acceleration methods either sparsify the attention map with structured patterns or permanently evict tokens at specific layers, which can retain irrelevant tokens or rely on irreversible early decisions despite the layer-/head-wise dynamics of token importance. In this paper, we propose Token Sparse Attention, a lightweight and dynamic token-level sparsification mechanism that compresses per-head Q, K, V to a reduced token set during attention and then decompresses the output back to the original sequence, enabling token information to be reconsidered in subsequent layers. Furthermore, Token Sparse Attention exposes a new design point at the intersection of token selection and sparse attention. Our approach is fully compatible with dense attention implementations, including Flash Attention, and can be seamlessly composed with existing sparse attention kernels. Experimental results show that Token Sparse Attention consistently improves accuracy-latency trade-off, achieving up to times3.23 attention speedup at 128K context with less than 1% accuracy degradation. These results demonstrate that dynamic and interleaved token-level sparsification is a complementary and effective strategy for scalable long-context inference.

Scaling laws enable the optimal selection of data amount and language model size, yet the impact of the data unit, the token, on this relationship remains underexplored. In this work, we systematically investigate how the information granularity of tokens, controlled by the compression rate (i.e., average bytes of text per token), affects scaling trends. We train 988 latent tokenized models (BLT) ranging from 50M to 7B parameters that enable setting the desired compression rate. This flexibility allows us to study the role of compression rate well beyond 4.57 bytes per token obtained with a popular BPE tokenizer. Our experiments reveal that in compute-optimal configurations, model parameter counts scale proportionally to data size measured in bytes, not in tokens as commonly perceived (Kaplan et al., 2020; Hoffmann et al., 2022). Furthermore, we discover that the optimal compression rate differs from the one obtained with BPE and decreases with compute. These findings generalize to both latent and subword tokenization, as well as to languages other than English, guiding language model developers on tokenization scheme selection for maximal compute efficiency.

Speculative decoding accelerates inference for Large Language Models by using a lightweight draft model to propose candidate tokens that are verified in parallel by a larger target model. Prior work shows that the draft model often dominates speculative decoding latency, since it generates tokens sequentially and incurs high cost from its language modeling head as vocabulary size grows. This exposes a fundamental trade-off in draft model design: larger vocabularies improve token coverage and agreement with the target model, but incur higher draft latency, while smaller vocabularies reduce latency at the risk of missing tokens required for accurate draft generation. We address this trade-off through vocabulary trimming for draft models, motivated by the observation that domain-specific workloads use only a small fraction of the full vocabulary. We cast draft vocabulary selection as a constrained optimization problem that balances token coverage and draft latency. Coverage is computed over assistant responses in the training data, while latency is estimated using architecture-aware FLOPs that capture the cost of the language modeling head as a function of vocabulary size. We optimize a utility function with a Tree-structured Parzen Estimator to efficiently explore the coverage-latency Pareto frontier under a minimum coverage constraint. Experiments show improved speculative decoding throughput while reducing draft vocabularies by up to 97% with high coverage. On domain-specific tasks, we achieve up to 16% latency reduction and 20% throughput improvement, and up to 6.7% throughput gains on diverse out-of-distribution tasks.

Generative artificial intelligence (AI) technology is revolutionizing the computing industry. Not only its applications have broadened to various sectors but also poses new system design and optimization opportunities. The technology is capable of understanding and responding in multiple modalities. However, the advanced capability currently comes with significant system resource demands. To sustainably scale generative AI capabilities to billions of users in the world, inference must be fast and efficient. This paper pinpoints key system design and optimization opportunities by characterizing a family of emerging multi-modal generation models on real systems. Auto-regressive token generation is a critical latency performance bottleneck, typically dominated by GPU idle time. In addition to memory-intensive attention across the generative AI models, linear operations constitute significant inference latency due to the feed forward networks in Transformer-based models. We demonstrate that state-of-the-art optimization levers, spanning from applications to system software and hardware, set a 3.88x better baseline.

Natural-language service requests can require a language-model decision before execution starts, consuming part of the request's latency budget. We integrate Jev's decision-oriented application programming interface (API) into edge service orchestration to reduce this overhead while retaining service completion. The integration extracts four to eight bounded intent fields and applies a shared validator, admission policy, and scheduler, accounting for decision waiting throughout the request timeline. We compare Jev, two self-hosted decision models, and three hosted large language models (LLMs) on 8,280 verified requests and on a live admission path with modeled execution and a real optical character recognition service. Across 33 test conditions, Jev reduces median decision latency by 22.7-64.5% relative to the fastest LLM. This latency barely moves with input size, contract width, or catalog size. On four-field contracts, Jev's API fees per correct decision are 59.7-80.9% lower at a cost of a few exact-match points, while wide contracts mark the limit of the substitution. Receiving the service catalog with each request, Jev names unseen services as accurately as known ones. On the live admission path, Jev keeps 0.91-0.95 of requests exact and on time at loads where the LLMs fall below 0.1. Since caching repeated descriptions gives the interpreters nearly the same latency, Jev's gain lies in fresh decisions. These results support decision-model substitution for latency-bound admission on bounded contracts.

We present a static token lookup methodology for text embedding generation that achieves 1.12 ms p50 latency for single text embeddings while maintaining 60.6 MTEB average score across 8 representative tasks, corresponding to 89% of contextual model quality. The Rust implementation delivers 50,000 requests per second throughput through static embedding lookup, optimized mean pooling, and zero-copy IEEE754 binary serialization. Evaluation demonstrates exceptional duplicate detection performance (90.1% AP), strong semantic similarity (76.1% Spearman correlation), and domain-specific performance ranging from 75% to 131% of baseline across specialized domains. The system enables real-time embedding applications where sub-5ms latency is critica

PromptReps showed that an autoregressive language model can be used directly as a retriever by prompting it to generate dense and sparse representations of a query or passage. Extending this to multiple representatives is inefficient for autoregressive models, since tokens must be generated sequentially, and prior multi-token variants did not reliably improve over single-token decoding. We show that the bottleneck is sequential generation, not the multi-token idea itself. DiffRetriever is a representative-token retriever for diffusion language models: it appends K masked positions to the prompt and reads all K in a single bidirectional forward pass. Across in-domain and out-of-domain evaluation, multi-token DiffRetriever substantially improves over single-token on every diffusion backbone we test, while autoregressive multi-token is flat or negative and pays a latency cost that scales with K where diffusion does not. After supervised fine-tuning, DiffRetriever on Dream is the strongest BEIR-7 retriever in our comparison, ahead of PromptReps, the encoder-style DiffEmbed baseline on the same diffusion backbones, and the contrastively fine-tuned single-vector RepLLaMA. A per-query oracle on the frozen base model exceeds contrastive fine-tuning at the same fixed budget, pointing to adaptive budget selection as future work. Code is available at https://github.com/ielab/diffretriever.

Large language models (LLMs) now support extremely long context windows, but the quadratic complexity of vanilla attention results in significantly long Time-to-First-Token (TTFT) latency. Existing approaches to address this complexity require additional pretraining or finetuning, and often sacrifice model accuracy. In this paper, we first provide both theoretical and empirical foundations for near-lossless sparse attention. We find dynamically capturing head-specific sparse patterns at runtime with low overhead is crucial. To address this, we propose SampleAttention, an adaptive structured and near-lossless sparse attention. Leveraging observed significant sparse patterns, SampleAttention attends to a fixed percentage of adjacent tokens to capture local window patterns, and employs a two-stage query-guided key-value filtering approach, which adaptively select a minimum set of key-values with low overhead, to capture column stripe patterns. Comprehensive evaluations show that SampleAttention can seamlessly replace vanilla attention in off-the-shelf LLMs with nearly no accuracy loss, and reduces TTFT by up to 2.42times compared with FlashAttention.

As the demand for long-context large language models (LLMs) increases, models with context windows of up to 128K or 1M tokens are becoming increasingly prevalent. However, long-context LLM inference is challenging since the inference speed decreases significantly as the sequence length grows. This slowdown is primarily caused by loading a large KV cache during self-attention. Previous works have shown that a small portion of critical tokens will dominate the attention outcomes. However, we observe the criticality of a token highly depends on the query. To this end, we propose Quest, a query-aware KV cache selection algorithm. Quest keeps track of the minimal and maximal Key values in KV cache pages and estimates the criticality of a given page using Query vectors. By only loading the Top-K critical KV cache pages for attention, Quest significantly speeds up self-attention without sacrificing accuracy. We show that Quest can achieve up to 2.23x self-attention speedup, which reduces inference latency by 7.03x while performing well on tasks with long dependencies with negligible accuracy loss. Code is available at http://github.com/mit-han-lab/Quest .

We introduce Full-Duplex-Bench-v3 (FDB-v3), a benchmark for evaluating spoken language models under naturalistic speech conditions and multi-step tool use. Unlike prior work, our dataset consists entirely of real human audio annotated for five disfluency categories, paired with scenarios requiring chained API calls across four task domains. We evaluate six model configurations -- GPT-Realtime, Gemini Live 2.5, Gemini Live 3.1, Grok, Ultravox v0.7, and a traditional Cascaded pipeline (WhisperrightarrowGPT-4orightarrowTTS) -- across accuracy, latency, and turn-taking dimensions. GPT-Realtime leads on Pass@1 (0.600) and interruption avoidance (13.5\%); Gemini Live 3.1 achieves the fastest latency (4.25~s) but the lowest turn-take rate (78.0\%); and the Cascaded baseline, despite a perfect turn-take rate, incurs the highest latency (10.12~s). Across all systems, self-correction handling and multi-step reasoning under hard scenarios remain the most consistent failure modes.

Diffusion large language models (dLLMs) offer a promising paradigm for parallel text generation, but in practice they face an accuracy-parallelism trade-off, where increasing tokens per forward (TPF) often degrades generation quality. Existing acceleration methods often gain speed at the cost of accuracy. To address this limitation, we propose TAD, a Temporal-Aware trajectory self-Distillation framework. During data construction, we condition a teacher model on both the prompt and the ground-truth response to generate decoding trajectories, recording the intermediate masked states throughout the process. Based on how many decoding steps remain before each masked token is revealed, we partition masked positions into near and distant subsets. For near tokens, we train the student with a hard cross-entropy loss using the teacher trajectory tokens as labels, encouraging confident predictions for tokens that are about to be decoded. For distant tokens, we apply a soft KL divergence loss between the teacher and student token distributions, providing softer supervision and preserving future planning knowledge. This temporal-aware partition naturally gives rise to two deployment configurations: a Quality model that prioritizes accuracy and a Speed model that favors more aggressive acceleration. Experiments show that TAD consistently improves the accuracy-parallelism trade-off. On LLaDA, it raises average accuracy from 46.2\% to 51.6\% with the Quality model and average AUP from 46.2 to 257.1 with the Speed model. Our code is available at: https://github.com/BHmingyang/TAD

As large language models (LLMs) are increasingly deployed with highly heterogeneous workloads, chunked-prefill execution has emerged as a mainstream serving architecture. Balancing scheduling fairness and latency stability in such environments is critical; otherwise, severe head-of-line blocking and request starvation will degrade user experience. However, existing systems rely on rigid First-Come, First-Served (FCFS) policies and static token budgets, leading to fairness degradation and unpredictable latency jitter. To address these issues, we propose a fairness-aware and latency-controllable scheduling framework for chunked-prefill LLM engines. Specifically, we design a lightweight aging-based scheduling policy that dynamically calculates priorities using accumulated waiting time and remaining prefill work. Furthermore, we develop Latency-Prediction-Based Request Scheduling (LPRS) and Active Prefill Control (APC) to replace static budgets with target-time constraints and actively regulate prefill concurrency. We evaluated our scheduling framework on NVIDIA GPUs and Ascend accelerators using real-world workloads. Results show the aging policy reduces mean end-to-end latency by over 10\% compared to FCFS. Moreover, LPRS and APC significantly reduce P99 tail latency and suppress prefill fragmentation, confirming that the structural prefill control and the temporal latency constraints are fundamentally complementary. All codes have been released in Github.

Interactive agents repeatedly choose among a finite set of actions, labels, or ordinal outcomes. Generating a free-form response for each choice adds latency and complicates the interface between a model and its environment. We present Intern-Decision, a family of 0.8B, 2B, and 4B multimodal decision models that return structured choices and candidate probabilities from text and optional images. Our autoregressive masked language modeling objective places one decision placeholder per field in a complete assistant JSON skeleton. Ground-truth symbols appear only in supervision, while all fields are evaluated in a single causal forward pass using the backbone's native language-model head. The 4B model achieves a 90.02% unweighted average accuracy across seven evaluation suites, compared with 88.74% for Jev v1.13.0. For a fixed 289-token request with three fields on one RTX 4090, mean latency is 44.16 ms for the 4B model and approximately 33--34 ms for the smaller models. On a separate 96-case known-distribution pilot, temperature scaling reduces expected multiclass Brier from 0.628 to 0.550 and expected calibration error from 0.213 to 0.089. A confidence-based handoff study on 111 public Jevbench-Hard items improves accuracy from 82/111 (73.87%) to 97/111 (87.39%) by routing 42 items to Atria-Dawn-Preview. We also describe qualitative game, visual interface, and browser demonstrations. These results support compact decision models as a practical component of larger agent systems.

Multi-token prediction (MTP) is a prominent strategy to significantly speed up generation in large language models (LLMs), especially in byte-level LLMs, which are tokeniser-free but prohibitively slow. However, many existing MTP methods either assume independence between future tokens, sacrificing expressiveness, or generate tokens one at a time within the window, increasing latency. In this work, we investigate the trade-off between expressiveness and latency in MTP within the framework of probabilistic circuits (PCs). Our framework, MTPC, allows one to explore different ways to encode the joint distributions over future tokens by selecting circuit architectures, generalising classical models such as (hierarchical) mixture models, hidden Markov models, and tensor networks. We show the efficacy of MTPC by retrofitting existing byte-level LLMs, such as EvaByte, and byte-fied subword models, such as Llama3.2 3B. Our experiments show that, when combined with speculative decoding, MTPC substantially speeds up generation compared to MTP with independence assumptions, while guaranteeing to retain the performance of the original verifier LLM. We also rigorously study the optimal trade-off between expressiveness and latency when exploring the possible parameterisations of MTPC, such as PC architectures and partial layer sharing between the verifier and draft LLMs.

Large language model (LLM) routing distributes inference work across different models, advancing the cost-quality Pareto frontier of LLM serving. While coarse-grained routing at the session or query level has been widely adopted in production systems, recent algorithmic work shows that fine-grained token-level routing can yield substantial efficiency and quality gains. However, efficiently serving token-level routed inference poses significant challenges to existing systems. Built on single-LLM assumptions, current systems suffer from severe step desynchronization and frequent batch admission delays under token-level routing, and they also impose high implementation complexity on developers. To address these challenges, we design TokenRouter, an efficient and developer-friendly serving system for token-level routed LLM inference. TokenRouter follows the principle of request-centric programming, model-centric execution: developers describe routing logic from the perspective of a single request, while the runtime launches a subserver for each LLM and dispatches requests asynchronously. Each subserver employs a delayed-batching scheduler, whose optimal hyperparameters are derived from a mathematical throughput model of the system. Across diverse routing algorithms, workloads, and model pairs, TokenRouter achieves 2.01-64.15x higher decoding throughput than existing systems, substantially advancing the serving efficiency of token-level LLM routing. Our code is available at https://github.com/thu-nics/TokenRouter.

Visual Autoregressive (VAR) modeling has gained popularity for its shift towards next-scale prediction. However, existing VAR paradigms process the entire token map at each scale step, leading to the complexity and runtime scaling dramatically with image resolution. To address this challenge, we propose FastVAR, a post-training acceleration method for efficient resolution scaling with VARs. Our key finding is that the majority of latency arises from the large-scale step where most tokens have already converged. Leveraging this observation, we develop the cached token pruning strategy that only forwards pivotal tokens for scale-specific modeling while using cached tokens from previous scale steps to restore the pruned slots. This significantly reduces the number of forwarded tokens and improves the efficiency at larger resolutions. Experiments show the proposed FastVAR can further speedup FlashAttention-accelerated VAR by 2.7times with negligible performance drop of <1%. We further extend FastVAR to zero-shot generation of higher resolution images. In particular, FastVAR can generate one 2K image with 15GB memory footprints in 1.5s on a single NVIDIA 3090 GPU. Code is available at https://github.com/csguoh/FastVAR.

Efficient parallelism is necessary for achieving low-latency, high-throughput inference with large language models (LLMs). Tensor parallelism (TP) is the state-of-the-art method for reducing LLM response latency, however GPU communications reduces combined token throughput. On the other hand, data parallelism (DP) obtains a higher throughput yet is slow in response latency. Best of both worlds does not exist, and it is not possible to combine TP and DP because of the KV cache variance across the parallelisms. We notice Sequence Parallelism (SP - Ulysses in training) has similar properties as DP but with KV cache invariance. We adapt SP to inference, and combine it with TP to get the best of both worlds. Our solution: Shift Parallelism. Shift Parallelism dynamically switches across TP and SP, and minimizes latency in low traffic without losing throughput in high traffic. The efficient GPU communications of Shift Parallelism yields up to i) 1.51x faster response in interactive workloads and ii) 50% higher throughput in batch workloads, compared to a TP-only solution. We evaluate Shift Parallelism with real-world production traces with dynamic traffic patterns as well as synthetic benchmarking patterns across models, context sizes, and arrival rates. All results affirm the same: Shift Parallelism has a better the latency vs. throughput tradeoff than TP or DP, and hence obtains low latency without degrading throughput in dynamic workloads.

Scaling the size of language models to tens of billions of parameters has led to impressive performance on a wide range of tasks. At generation, these models are used auto-regressively, requiring a forward pass for each generated token, and thus reading the full set of parameters from memory. This memory access forms the primary bottleneck for generation and it worsens as the model size increases. Moreover, executing a forward pass for multiple tokens in parallel often takes nearly the same time as it does for just one token. These two observations lead to the development of speculative sampling, where a second smaller model is used to draft a few tokens, that are then validated or rejected using a single forward pass of the large model. Unfortunately, this method requires two models that share the same tokenizer and thus limits its adoption. As an alternative, we propose to use parallel decoding as a way to draft multiple tokens from a single model with no computational cost, nor the need for a second model. Our approach only requires an additional input token that marks the words that will be generated simultaneously. We show promising performance (up to 30% speed-up) while requiring only as few as O(d_{emb}) additional parameters.

Diffusion language models (DLMs) have emerged as a promising alternative to autoregressive (AR) models, offering sub-linear generation latency and bidirectional capabilities that are particularly appealing for code generation and editing. Achieving sub-linear latency in discrete DLMs requires predicting multiple tokens in parallel. However, standard DLMs sample tokens independently from conditional marginal distributions, failing to capture the joint dependencies among concurrently generated tokens. As a result, they often lead to syntactic inconsistencies and break multi-token structures. In this work, we introduce CoDiLA (Coherent Diffusion with Local Autoregression), a method that reconciles parallel sampling with local dependency modeling. Rather than forcing the DLM to resolve fine-grained syntax, CoDiLA delegates local decoding to a small, auxiliary AR model operating on the diffusion latents. This design allows for parallel block generation while ensuring sequential validity within each block and maintaining core DLM capabilities, including bidirectional modeling across blocks. We demonstrate that using a highly compact auxiliary AR model (e.g., 0.6B parameters) effectively eliminates coherence artifacts, establishing a new Pareto frontier for accuracy and speed in code generation benchmarks.

The throughput gains of speculative decoding depend on the trade-off between acceptance length and execution latency. We ask when additional acceptance is worth the cost of obtaining it. We establish a comparison protocol spanning training, inference, and evaluation, remeasuring released checkpoints and retraining six drafter recipes on shared target-generated data across ten benchmarks and two target models. Alignment changes the picture: gaps that appear large in published comparisons shrink substantially under shared training and inference conditions. This narrowing motivates two deeper questions: how is acceptance improved at different costs, and when do these gains improve throughput? We find that acceptance can be improved through nearly free objective and context changes or more expensive token-to-token conditioning. DCore illustrates the former route as a strong baseline with little additional measured drafting overhead. The payoff is conditional: task uncertainty and serving conditions affect acceptance returns, execution costs, and the preferred drafter and budget. These findings inform future drafter design and deployment choices.

Key-Value (KV) cache remains a major bottleneck for deploying Large Language Models (LLMs) in long-generation tasks. Prior work often applies uniform compression across both prefill and decoding caches, but compressing the prefill cache degrades performance by corrupting critical context. While preserving the prefill cache is essential, decoding-phase compression remains underexplored, with existing methods relying on rigid recency windows or instantaneous attention. Our analysis of attention dynamics reveals strong temporal patterns: critical tokens receive sustained attention over long horizons, while local reasoning involves short-lived bursts. Static heuristics fail to capture this behavior, leading to premature eviction of important tokens or retention of stale ones. We propose Moment-KV, a decoding-time KV cache compression method based on momentum-driven temporal attention aggregation. Our method models token importance as a continuously evolving state, where attention is aggregated with decay, capturing both long-term influence and recent relevance. Experiments show that Moment-KV significantly improves generation fidelity in long-generation tasks (2.3-3.2 %) while maintaining decoding latency.

To render each generated token in real-time for users, the Large Language Model (LLM) server generates tokens one by one and streams each token (or group of a few tokens) through the network to the user right after generation, which we refer to as LLM token streaming. However, under unstable network conditions, the LLM token streaming experience could suffer greatly from stalls since one packet loss could block the rendering of later tokens even if the packets containing them arrive on time. With a measurement study, we show that current applications suffer from increased stalls under unstable networks. For this emerging token streaming problem in LLM Chatbots that differs from previous multimedia and text applications, we propose a novel transmission scheme, called Eloquent, which puts newly generated tokens as well as currently unacknowledged tokens in the next outgoing packet. This ensures that each packet contains some new tokens and, in the meantime, is independently rendered when received, avoiding the aforementioned stalls caused by missing packets. Through simulation under various networks, we show Eloquent reduces stall ratio (proportion of token rendering wait time) by 71.0% compared to the retransmission method commonly used by real chatbot applications and by 31.6% compared to the baseline packet duplication scheme. By tailoring Eloquent to fit the token-by-token generation of LLM, we enable the Chatbots to respond like an eloquent speaker for users to better enjoy pervasive AI.

Autoregressive large language models (LLMs) have made remarkable progress in various natural language generation tasks. However, they incur high computation cost and latency resulting from the autoregressive token-by-token generation. To address this issue, several approaches have been proposed to reduce computational cost using early-exit strategies. These strategies enable faster text generation using reduced computation without applying the full computation graph to each token. While existing token-level early exit methods show promising results for online inference, they cannot be readily applied for batch inferencing and Key-Value caching. This is because they have to wait until the last token in a batch exits before they can stop computing. This severely limits the practical application of such techniques. In this paper, we propose a simple and effective token-level early exit method, SkipDecode, designed to work seamlessly with batch inferencing and KV caching. It overcomes prior constraints by setting up a singular exit point for every token in a batch at each sequence position. It also guarantees a monotonic decrease in exit points, thereby eliminating the need to recompute KV Caches for preceding tokens. Rather than terminating computation prematurely as in prior works, our approach bypasses lower to middle layers, devoting most of the computational resources to upper layers, allowing later tokens to benefit from the compute expenditure by earlier tokens. Our experimental results show that SkipDecode can obtain 2x to 5x inference speedups with negligible regression across a variety of tasks. This is achieved using OPT models of 1.3 billion and 6.7 billion parameters, all the while being directly compatible with batching and KV caching optimization techniques.

The deployment of Large Language Models (LLMs) faces a critical bottleneck when handling lengthy inputs: the prohibitive memory footprint of the Key Value (KV) cache. To address this bottleneck, the token pruning paradigm leverages attention sparsity to selectively retain a small, critical subset of tokens. However, existing approaches fall short, with static methods risking irreversible information loss and dynamic strategies employing heuristics that insufficiently capture the query-dependent nature of token importance. We propose FASA, a novel framework that achieves query-aware token eviction by dynamically predicting token importance. FASA stems from a novel insight into RoPE: the discovery of functional sparsity at the frequency-chunk (FC) level. Our key finding is that a small, identifiable subset of "dominant" FCs consistently exhibits high contextual agreement with the full attention head. This provides a robust and computationally free proxy for identifying salient tokens. %making them a powerful and efficient proxy for token importance. Building on this insight, FASA first identifies a critical set of tokens using dominant FCs, and then performs focused attention computation solely on this pruned subset. % Since accessing only a small fraction of the KV cache, FASA drastically lowers memory bandwidth requirements and computational cost. Across a spectrum of long-context tasks, from sequence modeling to complex CoT reasoning, FASA consistently outperforms all token-eviction baselines and achieves near-oracle accuracy, demonstrating remarkable robustness even under constraint budgets. Notably, on LongBench-V1, FASA reaches nearly 100\% of full-KV performance when only keeping 256 tokens, and achieves 2.56times speedup using just 18.9\% of the cache on AIME24.

We adapt the architectures of previous audio manipulation and generation neural networks to the task of real-time any-to-one voice conversion. Our resulting model, LLVC (Low-latency Low-resource Voice Conversion), has a latency of under 20ms at a bitrate of 16kHz and runs nearly 2.8x faster than real-time on a consumer CPU. LLVC uses both a generative adversarial architecture as well as knowledge distillation in order to attain this performance. To our knowledge LLVC achieves both the lowest resource usage as well as the lowest latency of any open-source voice conversion model. We provide open-source samples, code, and pretrained model weights at https://github.com/KoeAI/LLVC.

Diffusion language models offer parallel token generation and inherent bidirectionality, promising more efficient and powerful sequence modeling compared to autoregressive approaches. However, state-of-the-art diffusion models (e.g., Dream 7B, LLaDA 8B) suffer from slow inference. While they match the quality of similarly sized Autoregressive (AR) Models (e.g., Qwen2.5 7B, Llama3 8B), their iterative denoising requires multiple full-sequence forward passes, resulting in high computational costs and latency, particularly for long input prompts and long-context scenarios. Furthermore, parallel token generation introduces token incoherence problems, and current sampling heuristics suffer from significant quality drops with decreasing denoising steps. We address these limitations with two training-free techniques. First, we propose FreeCache, a Key-Value (KV) approximation caching technique that reuses stable KV projections across denoising steps, effectively reducing the computational cost of DLM inference. Second, we introduce Guided Diffusion, a training-free method that uses a lightweight pretrained autoregressive model to supervise token unmasking, dramatically reducing the total number of denoising iterations without sacrificing quality. We conduct extensive evaluations on open-source reasoning benchmarks, and our combined methods deliver up to a 34x end-to-end speedup without compromising accuracy. For the first time, diffusion language models achieve a comparable and even faster latency as the widely adopted autoregressive models. Our work successfully paved the way for scaling up the diffusion language model to a broader scope of applications across different domains.

Real-time interaction requires agents to perceive evolving environments and act under temporal constraints, yet existing evaluations of real-time streaming models focus on conversational quality and streaming perception, leaving effective action under strict temporal constraints untested. We introduce Realtime-Bench, a suite of carefully curated dynamic tasks where delayed actions directly affect success. Under Wall Clock, where environments advance according to actual inference latency, the best success rate reaches only 44% and the best Pass^3 is only 36%, demonstrating that real-time interaction remains challenging. To separate serving latency from models' real-time streaming capability, we compare Wall Clock with Paused Clock, which removes inference delays as an idealized reference, and introduce Token Clock, which advances simulated time according to generated token counts, testing temporal awareness independently of physical serving speed. We find that temporal costs limit success in evolving environments and that higher reasoning effort has mixed effects under time pressure, reflecting a trade-off between decision quality and timely execution. These findings suggest directions for improving real-time multimodal agents, including adaptive reasoning with temporal awareness and continuous perception and action.

Autoregressive models, despite their commendable performance in a myriad of generative tasks, face challenges stemming from their inherently sequential structure. Inference on these models, by design, harnesses a temporal dependency, where the current token's probability distribution is conditioned on preceding tokens. This inherent characteristic severely impedes computational efficiency during inference as a typical inference request can require more than thousands of tokens, where generating each token requires a load of entire model weights, making the inference more memory-bound. The large overhead becomes profound in real deployment where requests arrive randomly, necessitating various generation lengths. Existing solutions, such as dynamic batching and concurrent instances, introduce significant response delays and bandwidth contention, falling short of achieving optimal latency and throughput. To address these shortcomings, we propose Flover -- a temporal fusion framework for efficiently inferring multiple requests in parallel. We deconstruct the general generation pipeline into pre-processing and token generation, and equip the framework with a dedicated work scheduler for fusing the generation process temporally across all requests. By orchestrating the token-level parallelism, Flover exhibits optimal hardware efficiency and significantly spares the system resources. By further employing a fast buffer reordering algorithm that allows memory eviction of finished tasks, it brings over 11x inference speedup on GPT and 16x on LLAMA compared to the cutting-edge solutions provided by NVIDIA FasterTransformer. Crucially, by leveraging the advanced tensor parallel technique, Flover proves efficacious across diverse computational landscapes, from single-GPU setups to distributed scenarios, thereby offering robust performance optimization that adapts to variable use cases.

Large language models have achieved notable success across various domains, yet efficient inference is still limited by the quadratic computation complexity of the attention mechanism. The inference consists of prefilling and decoding phases. Although several attempts have been made to accelerate decoding, the inefficiency of the prefilling phase, especially for long-context tasks, remains a challenge. In this paper, we observe a locality in query criticality during the prefilling phase of long-context processing: adjacent query tokens tend to focus on similar subsets of the past Key-Value (KV) cache. Based on this observation, we propose CritiPrefill, a criticality-based segment-wise prefilling method. This method partitions the input sequence's queries and KV cache into segments and blocks, utilizing a segment-wise algorithm to estimate the query criticality. By pruning non-critical computations between query segments and cache blocks in the self-attention mechanism, the prefilling process can be significantly accelerated. Extensive evaluations on multiple long-context datasets show up to 2.7x speedup on Llama3-8B and 3.0x speedup on Yi-9B for 128K context length on a single A100 GPU, with minimal quality degradation.

With the development of large language models (LLMs), efficient inference through Key-Value (KV) cache compression has attracted considerable attention, especially for long-context generation. To compress the KV cache, recent methods identify critical KV tokens through heuristic ranking with attention scores. However, these methods often struggle to accurately determine critical tokens as they neglect the temporal patterns in attention scores, resulting in a noticeable degradation in LLM performance. To address this challenge, we propose AttentionPredictor, which is the first learning-based critical token identification approach. Specifically, AttentionPredictor learns a lightweight convolution model to capture spatiotemporal patterns and predict the next-token attention score. An appealing feature of AttentionPredictor is that it accurately predicts the attention score while consuming negligible memory. Moreover, we propose a cross-token critical cache prefetching framework that hides the token estimation time overhead to accelerate the decoding stage. By retaining most of the attention information, AttentionPredictor achieves 16times KV cache compression with comparable LLM performance, significantly outperforming the state-of-the-art.

Autoregressive large language model inference repeatedly invokes the target model to generate one token at a time, making generation sensitive to GPU memory movement and sequential execution. This study evaluates two-token multi-token prediction (MTP) against autoregressive decoding in a controlled single-request deployment on an NVIDIA A10G GPU. A 360-request benchmark covered plain-text, reasoning-intensive, and tool-calling workloads, while runtime telemetry, Nsight Systems, PyTorch Profiler, and selected Nsight Compute measurements were used to explain the observed performance. MTP increased output throughput by \(1.91\times\) to \(2.19\times\) across all prompts and reduced time to first output by 10.0--14.2\%. Median mean acceptance length ranged from 2.370 to 2.595 tokens per verification iteration. Profiling showed that MTP introduced a longer and more complex execution path, including proposal, sampling, attention, gathering, and reduction operations. However, it required 56.4--78.1\% fewer executions of the selected repeating CUDA Graph per generated token. The dominant MTP GEMM kernel was not faster than the dominant autoregressive GEMV kernel, and selected instances of both approached the A10G memory-bandwidth limit. These results show that MTP improved inference through amortization: greater token progress reduced repeated GPU execution sufficiently to outweigh the additional speculative-execution cost.

GPU collective communication is typically optimized for bandwidth, yet many emerging workloads are increasingly limited by latency. Long-context decode-heavy large language model (LLM) inference is a prime example, where serving large models requires multiple GPUs, and many small collectives lie directly on the critical path of token generation. Therefore, even microsecond of overhead can impact performance and cost. In this work, we study how to approach the hardware Speed-of-Light (SoL) lower bound for GPU collectives within a scale-up network. We identify key principles for near-optimal designs, including barrier-free synchronization and efficient use of symmetric memory and multicast. Building on NCCL's device-side API, we develop low-latency interfaces for constructing custom collective kernels and use them to implement new symmetric collectives in NCCL. Microbenchmarks show substantial latency reductions for small and medium messages, reducing overhead to within 7% of the absolute SoL lower bound. When integrated into real applications, these kernels improve inter-token latency and throughput in LLM inference and accelerate cuSOLVERMp, demonstrating benefits for both AI inference and traditional HPC workloads.

Full-duplex dialog models are designed to listen and speak simultaneously with rapid responses to fast-changing user input. Among existing approaches, native full-duplex models merges different channels (e.g. listen and speak) in a single time step, overcoming the high response latency inherent to time-division multiplexing time-division multiplexing (TDM) alternatives. Yet, a key challenge remains: aligning textual monologues with audio streams that operate at different bitrates. The prevailing solution relies on word-level alignment, but this can degrade the language ability of large pre-trained models. Moreover, it requires highly accurate timestamps for every token, which introduces cascading errors and increases pre-processing costs. In this paper, we propose textual monologues in continuous tokens sequence, namely "natural" monologues, which mimics humanoid cognitive behavior in dialogs. For temporal alignment, we alternate the position of the natural monologue - leading or trailing the audio - across different training stages. This "dual" training paradigm proves highly effective in building FLM-Audio, our 7B spoken dialog model that demonstrates superior responsiveness, duplexity, and chatting experiences, as confirmed by experimental results.

Practical large language model (LLM) services may involve a long system prompt, which specifies the instructions, examples, and knowledge documents of the task and is reused across numerous requests. However, the long system prompt causes throughput/latency bottlenecks as the cost of generating the next token grows w.r.t. the sequence length. This paper aims to improve the efficiency of LLM services that involve long system prompts. Our key observation is that handling these system prompts requires heavily redundant memory accesses in existing causal attention computation algorithms. Specifically, for batched requests, the cached hidden states (i.e., key-value pairs) of system prompts are transferred from off-chip DRAM to on-chip SRAM multiple times, each corresponding to an individual request. To eliminate such a redundancy, we propose RelayAttention, an attention algorithm that allows reading these hidden states from DRAM exactly once for a batch of input tokens. RelayAttention is a free lunch: it maintains the generation quality while requiring no model retraining, as it is based on a mathematical reformulation of causal attention.

We propose an open-source framework for Command-style dictation that addresses the gap between resource-intensive Online systems and high-latency Batch processing. Our approach uses Voice Activity Detection (VAD) to segment audio and transcribes these segments in parallel using Whisper models, enabling efficient multiplexing across audios. Unlike proprietary systems like SuperWhisper, this framework is also compatible with most ASR architectures, including widely used CTC-based models. Our multiplexing technique maximizes compute utilization in real-world settings, as demonstrated by its deployment in around 15% of India's courtrooms. Evaluations on live data show consistent latency reduction as user concurrency increases, compared to sequential batch processing. The live demonstration will showcase our open-sourced implementation and allow attendees to interact with it in real-time.

Real-time spoken dialogue systems face a fundamental tension between latency and response quality. End-to-end speech-to-speech (S2S) models respond immediately and naturally handle turn-taking, backchanneling, and interruption, but produce semantically weaker outputs. Cascaded pipelines (ASR -> LLM) deliver stronger responses at the cost of latency that grows with model size. We present RelayS2S, a hybrid architecture that runs two paths in parallel upon turn detection. The fast path -- a duplex S2S model -- speculatively drafts a short response prefix that is streamed immediately to TTS for low-latency audio onset, while continuing to monitor live audio events. The slow path -- a cascaded ASR -> LLM pipeline -- generates a higher-quality continuation conditioned on the committed prefix, producing a seamless utterance. A lightweight learned verifier gates the handoff, committing the prefix when appropriate or falling back gracefully to the slow path alone. Experiments show that RelayS2S achieves P90 onset latency comparable to the S2S model while retaining 99% cascaded response quality in average score, with benefits growing as the slow-path model scales. Because the prefix handoff requires no architectural modification to either component, RelayS2S serves as a lightweight, drop-in addition to existing cascaded pipelines. Our code and data are publicly available at: https://github.com/mailong25/relays2s

Whether attention key value (KV) states computed for one prompt for a small LLM can be reused to accelerate inference on a new similar prompt, giving an increase to the space to its context memory using an approach called token recycling. Using a standard Hugging Face setup with DialoGPT-medium (a 345M parameter GPT-2 style decoder trained on 147M Reddit exchanges, 2005 to 2017) as the testbed, we build a cache of past activations and get entries by sentence embeddings, then reuse cached past key values when the cached prompt is an exact prefix of the new input. We compare recycled vs. baseline runs on latency and output fidelity, and log reuse depth in tokens. Reproducibility requires no model modifications, cached KVs are serialized to the CPU, reloaded, and supplied to the generate function to continue decoding from the cached prefix. In tests, we observe consistent speedups when prefix overlap exists, with no material degradation in output semantics, and when overlap is absent, behavior matches baseline.

Sparse attention reduces the KV-cache traffic that dominates long-context LLM decoding, but practical methods largely operate at coarse granularity. Token-level selection offers finer control, yet presents two challenges: low-dimensional scoring may lose query--key structure needed for accurate ranking, while gathering scattered selected tokens can offset the resulting latency benefit. We introduce Joint Subspace Sparse Attention (JSSA) to address both challenges. For selection quality, JSSA learns a shared low-dimensional query--key subspace by minimizing token-score preservation error. We upper-bound the resulting non-convex objective with a tractable marginal objective that admits a closed-form spectral solution; direct refinement of the exact objective provides no measurable improvement in the tested settings. For execution efficiency, we develop a gather-free token-level indexed-attention kernel that supports distinct per-KV-head selections under the standard grouped-query attention (GQA) KV-cache layout. Across standard GQA, hybrid sliding-window/global attention, and Multi-head Latent Attention (MLA) models, JSSA consistently remains close to full-KV accuracy while avoiding the substantial generation-length inflation and architecture-dependent failures observed with competing methods. On an NVIDIA B200 GPU, JSSA achieves up to 6.43times the decoding throughput of full-KV attention at 128K context. JSSA achieves reasoning accuracy comparable to model-native DSA without model training and reaches 96--99\% of its decoding throughput even at 700B scale large models.

Language models generate responses by producing a series of tokens in immediate succession: the (K+1)^{th} token is an outcome of manipulating K hidden vectors per layer, one vector per preceding token. What if instead we were to let the model manipulate say, K+10 hidden vectors, before it outputs the (K+1)^{th} token? We operationalize this idea by performing training and inference on language models with a (learnable) pause token, a sequence of which is appended to the input prefix. We then delay extracting the model's outputs until the last pause token is seen, thereby allowing the model to process extra computation before committing to an answer. We empirically evaluate pause-training on decoder-only models of 1B and 130M parameters with causal pretraining on C4, and on downstream tasks covering reasoning, question-answering, general understanding and fact recall. Our main finding is that inference-time delays show gains when the model is both pre-trained and finetuned with delays. For the 1B model, we witness gains on 8 of 9 tasks, most prominently, a gain of 18% EM score on the QA task of SQuAD, 8% on CommonSenseQA and 1% accuracy on the reasoning task of GSM8k. Our work raises a range of conceptual and practical future research questions on making delayed next-token prediction a widely applicable new paradigm.

Many language-model pipelines end in a closed-set decision, such as selecting a tool. Prompting a large language model for it is slow and order-sensitive. We ask how small an encoder for such decisions can be and whether it should read the options jointly or separately. In a three-seed study at 32 million parameters, per-option scoring beats joint scoring on a held-out sample of a 37-benchmark decision suite by 5.8 points of chance-corrected skill at matched optimizer steps and by 2.8 at approximately matched training compute; two external benchmarks agree, though not significantly on their unseen tasks. Crossing reader with initialisation shows that the advantage requires a reranker initialisation, whose query-candidate pair input matches per-option reading; from the raw encoder the two readers are indistinguishable. Per-option scoring needs 5 to 13 times more encoder passes: at most twice the median latency, but more than four times the mean. Of six released joint encoders (17 million to 1 billion parameters), the 68- and 150-million-parameter models exceed a 435-million-parameter DeBERTa-v3 zero-shot classifier by 4.9 and 5.9 accuracy points on 209 overlap-audited System1-Arena tasks and are at least on par with it on the 145 tasks unseen in training. The smallest answers a median request in 14 milliseconds on 16 processor threads, against 728 for the classifier. Reordering options changes 12 to 23% of the joint models' answers (per-option scoring: none). Up to 68 million parameters, they lead their size range on a public leaderboard's private, mainly in-distribution tests.

Long-context inference in decoder-only language models is costly because long prompts are processed during Prefill, cached at every layer, and repeatedly attended to during autoregressive Decode. We introduce Shallow Prefill, dEEp Decode (SPEED), a phase-asymmetric KV-visibility policy that materializes non-anchor prompt-token KV states only in lower layers while keeping Decode-phase tokens full-depth. Unlike previous approaches that make upper-layer prompt KV states cheaper to store or construct, SPEED removes prefill tokens from the upper-layer Decode visibility set altogether. With a minimal BoS anchor, this simple change preserves broad benchmark quality while reducing long-context cost. In a controlled Llama-3.1-8B instruction-tuning study, SPEED using only 75\% of layers for prefill tokens reaches 51.2 average score on OLMES-style benchmarks, compared with 51.4 for the full-depth baseline, while improving TTFT by 33\%, TPOT by 22\%, and reducing active KV memory by 25.0\% at 128K context. Layer-wise diagnostics suggest that this cutoff retains the main prompt-selection and representation-stabilization regions of the full-depth model. These results show that long-context prompt tokens need not always persist as full-depth KV-cache objects when Decode-phase tokens remain full-depth.

LLM inference is still evaluated mainly as a model or software problem: accuracy, latency, throughput, and hardware utilization. This is incomplete. At deployment scale, the relevant output is a quality-conditioned token produced under joint constraints from effective compute, delivered data-center power, cooling capacity, PUE, and utilization. We argue that the ML community should treat inference as energy-to-token production. We formalize this view with a dimensionally consistent Token Production Function in which token rate is bounded by both compute-per-token and energy-per-token ceilings. Listed API prices vary by over an order of magnitude across providers, but we use price dispersion only as directional motivation, not as causal evidence of marginal cost. The core physical question is instead: under fixed quality and service targets, when does the binding constraint move from theoretical peak compute toward delivered power, cooling, and operational efficiency? Under this framing, system optimizations -- latent KV-cache compression, sparse or heavily compressed attention, quantization, routing, and difficulty-adaptive reasoning -- are not merely local engineering tricks. They are energy-to-token levers because they reduce FLOPs/token, joules/token, memory traffic, or utilization losses under fixed (q^{*},s^{*}). We therefore call for inference papers and benchmarks to report Joules/token, active binding constraint, PUE-adjusted delivered power, and utilization-adjusted token output alongside accuracy and latency.

The recent emergence of Large Language Models based on the Transformer architecture has enabled dramatic advancements in the field of Natural Language Processing. However, these models have long inference latency, which limits their deployment and makes them prohibitively expensive for various real-time applications. The inference latency is further exacerbated by autoregressive generative tasks, as models need to run iteratively to generate tokens sequentially without leveraging token-level parallelization. To address this, we propose Big Little Decoder (BiLD), a framework that can improve inference efficiency and latency for a wide range of text generation applications. The BiLD framework contains two models with different sizes that collaboratively generate text. The small model runs autoregressively to generate text with a low inference cost, and the large model is only invoked occasionally to refine the small model's inaccurate predictions in a non-autoregressive manner. To coordinate the small and large models, BiLD introduces two simple yet effective policies: (1) the fallback policy that determines when to hand control over to the large model; and (2) the rollback policy that determines when the large model needs to correct the small model's inaccurate predictions. To evaluate our framework across different tasks and models, we apply BiLD to various text generation scenarios encompassing machine translation on IWSLT 2017 De-En and WMT 2014 De-En, and summarization on XSUM and CNN/DailyMail. On an NVIDIA T4 GPU, our framework achieves a speedup of up to 2.12x speedup with minimal generation quality degradation. Furthermore, our framework is fully plug-and-play and can be applied without any modifications in the training process or model architecture. Our code is open-sourced

A unique aspect of ColBERT is its use of [MASK] tokens in queries to score documents (query augmentation). Prior work shows [MASK] tokens weighting non-[MASK] query terms, emphasizing certain tokens over others , rather than introducing whole new terms as initially proposed. We begin by demonstrating that a term weighting behavior previously reported for [MASK] tokens in ColBERTv1 holds for ColBERTv2. We then examine the effect of changing the number of [MASK] tokens from zero to up to four times past the query input length used in training, both for first stage retrieval, and for scoring candidates, observing an initial decrease in performance with few [MASK]s, a large increase when enough [MASK]s are added to pad queries to an average length of 32, then a plateau in performance afterwards. Additionally, we compare baseline performance to performance when the query length is extended to 128 tokens, and find that differences are small (e.g., within 1% on various metrics) and generally statistically insignificant, indicating performance does not collapse if ColBERT is presented with more [MASK] tokens than expected.

Large vision-language models (VLMs) such as GPT-4 have achieved exceptional performance across various multi-modal tasks. However, the deployment of VLMs necessitates substantial energy consumption and computational resources. Once attackers maliciously induce high energy consumption and latency time (energy-latency cost) during inference of VLMs, it will exhaust computational resources. In this paper, we explore this attack surface about availability of VLMs and aim to induce high energy-latency cost during inference of VLMs. We find that high energy-latency cost during inference of VLMs can be manipulated by maximizing the length of generated sequences. To this end, we propose verbose images, with the goal of crafting an imperceptible perturbation to induce VLMs to generate long sentences during inference. Concretely, we design three loss objectives. First, a loss is proposed to delay the occurrence of end-of-sequence (EOS) token, where EOS token is a signal for VLMs to stop generating further tokens. Moreover, an uncertainty loss and a token diversity loss are proposed to increase the uncertainty over each generated token and the diversity among all tokens of the whole generated sequence, respectively, which can break output dependency at token-level and sequence-level. Furthermore, a temporal weight adjustment algorithm is proposed, which can effectively balance these losses. Extensive experiments demonstrate that our verbose images can increase the length of generated sequences by 7.87 times and 8.56 times compared to original images on MS-COCO and ImageNet datasets, which presents potential challenges for various applications. Our code is available at https://github.com/KuofengGao/Verbose_Images.

Speculative decoding accelerates autoregressive inference by verifying multiple draft tokens in a single target forward pass. However, as the context grows, existing state-of-the-art drafters become increasingly expensive, eroding the very efficiency advantage they are designed to provide. We argue that this scaling is unnecessary. A standalone language model must grow with its prefix because it is solely responsible for every token it produces. A drafter, by contrast, only proposes candidates; the target catches and corrects every error before any token is committed. The drafter's decoding cost can therefore be made entirely independent of the prefix length. We introduce LongSpark, a block-diffusion drafter that achieves this by extracting fixed-size, multiscale views from the target's verification pass, thereby eliminating the need for a growing persistent state. Extensive evaluations demonstrate that LongSpark achieves state-of-the-art end-to-end efficiency across multiple model scales and realistic serving conditions. Notably, it delivers the lowest time-per-output-token on long-context tasks while reducing the drafter's context state by several orders of magnitude.

Large Language Models (LLMs) typically generate outputs token by token using a fixed compute budget, leading to inefficient resource utilization. To address this shortcoming, recent advancements in mixture of expert (MoE) models, speculative decoding, and early exit strategies leverage the insight that computational demands can vary significantly based on the complexity and nature of the input. However, identifying optimal routing patterns for dynamic execution remains an open challenge, limiting the full potential of these adaptive methods. To address this need, we study adaptive computation in LLMs more systematically. We propose a novel framework that integrates smaller auxiliary modules within each Feed-Forward Network layer of the LLM. This design enables dynamic routing of tokens based on task complexity: tokens can be processed by either the small or big modules at each layer, or even bypass certain layers entirely. This allows us to introduce a novel notion of a token's difficulty, defined by its potential to benefit from additional computational resources. Importantly, by employing oracles to identify optimal patterns of adaptive computations, we gain valuable insights into the internal workings of LLMs and the routing processes in a simplified heterogeneous MoE setup. We show that trained routers operate differently from oracles and often yield suboptimal solutions. Notably, activating a large module in just one layer outperforms models that use large modules across all layers, underscoring the gap between practical implementations of routing in MoE models and theoretical optima for adaptive computation.

While low-latency interaction is critical for spoken dialogue, cascaded architectures are often bottlenecked by reactive turn-completion detection. We propose Endpoint Anticipation, shifting from reactive detection to proactive forecasting of end-of-turn signals. Our speech-based model anticipates endpoints upto 2.56 seconds in advance, enabling speculative execution of LLM and TTS pipelines on partial context. We introduce metrics to quantify the trade-off between realized latency reduction and computational redundancy. Evaluation across conversational and task-oriented datasets shows our model consistently outperforms competitive VAP-based baselines. Integration with the Unmute framework demonstrates a 505 ms average latency reduction with a 28.4% increase in speculative computation, effectively masking sequential bottlenecks to enable complex reasoning in real-time speech-to-speech interaction.

Serving large language models (LLMs) in production can incur substantial costs, which has prompted recent advances in inference system optimizations. Today, these systems are evaluated against conventional latency and throughput metrics (eg. TTFT, TBT, Normalised Latency and TPOT). However, these metrics fail to fully capture the nuances of LLM inference, leading to an incomplete assessment of user-facing performance crucial for real-time applications such as chat and translation. In this paper, we first identify the pitfalls of current performance metrics in evaluating LLM inference systems. We then propose Etalon, a comprehensive performance evaluation framework that includes fluidity-index -- a novel metric designed to reflect the intricacies of the LLM inference process and its impact on real-time user experience. Finally, we evaluate various existing open-source platforms and model-as-a-service offerings using Etalon, discussing their strengths and weaknesses. Etalon is available at https://github.com/project-etalon/etalon.

End-to-end (E2E) models have shown to outperform state-of-the-art conventional models for streaming speech recognition [1] across many dimensions, including quality (as measured by word error rate (WER)) and endpointer latency [2]. However, the model still tends to delay the predictions towards the end and thus has much higher partial latency compared to a conventional ASR model. To address this issue, we look at encouraging the E2E model to emit words early, through an algorithm called FastEmit [3]. Naturally, improving on latency results in a quality degradation. To address this, we explore replacing the LSTM layers in the encoder of our E2E model with Conformer layers [4], which has shown good improvements for ASR. Secondly, we also explore running a 2nd-pass beam search to improve quality. In order to ensure the 2nd-pass completes quickly, we explore non-causal Conformer layers that feed into the same 1st-pass RNN-T decoder, an algorithm called Cascaded Encoders [5]. Overall, we find that the Conformer RNN-T with Cascaded Encoders offers a better quality and latency tradeoff for streaming ASR.

Autoregressive (AR) Large Language Models (LLMs) have demonstrated significant success across numerous tasks. However, the AR modeling paradigm presents certain limitations; for instance, contemporary autoregressive LLMs are trained to generate one token at a time, which can result in noticeable latency. Recent advances have indicated that search and repeated sampling can enhance performance in various applications, such as theorem proving, code generation, and alignment, by utilizing greater computational resources during inference. In this study, we demonstrate that diffusion language models are capable of generating at least 32 tokens simultaneously, while exceeding the performance of AR models in text quality and on the LAMBADA natural language understanding benchmark. This outcome is achieved through a novel distillation method for discrete diffusion models, which reduces the number of inference steps by a factor of 32-64. Practically, our models, even without caching, can generate tokens at a rate that is up to 8 times faster than AR models employing KV caching, and we anticipate further improvements with the inclusion of caching. Moreover, we demonstrate the efficacy of our approach for diffusion language models with up to 860M parameters.

The Mixture of Experts (MoE) is an effective architecture for scaling large language models by leveraging sparse expert activation, optimizing the trade-off between performance and efficiency. However, under expert parallelism, MoE suffers from inference inefficiencies due to imbalanced token-to-expert assignment, where some experts are overloaded while others remain underutilized. This imbalance leads to poor resource utilization and increased latency, as the most burdened expert dictates the overall delay, a phenomenon we define as the \textit{Straggler Effect}. To mitigate this, we propose Capacity-Aware Inference, including two key techniques: (1) \textit{Capacity-Aware Token Drop}, which discards overloaded tokens to regulate the maximum latency of MoE, and (2) \textit{Capacity-Aware Token Reroute}, which reallocates overflowed tokens to underutilized experts, balancing the token distribution. These techniques collectively optimize both high-load and low-load expert utilization, leading to a more efficient MoE inference pipeline. Extensive experiments demonstrate the effectiveness of our methods, showing significant improvements in inference efficiency, e.g., 0.2\% average performance increase and a 1.94times inference speedup on Mixtral-8times7B-Instruct.

Simultaneous speech-to-text translation (SimulST) systems have to balance translation quality with latency--the delay between speech input and the translated output. While quality evaluation is well established, accurate latency measurement remains a challenge. Existing metrics often produce inconsistent or misleading results, especially in the widely used short-form setting, where speech is artificially presegmented. In this paper, we present the first comprehensive analysis of SimulST latency metrics across language pairs, systems, and both short- and long-form regimes. We uncover a structural bias in current metrics related to segmentation that undermines fair and meaningful comparisons. To address this, we introduce YAAL (Yet Another Average Lagging), a refined latency metric that delivers more accurate evaluations in the short-form regime. We extend YAAL to LongYAAL for unsegmented audio and propose SoftSegmenter, a novel resegmentation tool based on word-level alignment. Our experiments show that YAAL and LongYAAL outperform popular latency metrics, while SoftSegmenter enhances alignment quality in long-form evaluation, together enabling more reliable assessments of SimulST systems.

Recent image generation schemes typically capture image distribution in a pre-constructed latent space relying on a frozen image tokenizer. Though the performance of tokenizer plays an essential role to the successful generation, its current evaluation metrics (e.g. rFID) fail to precisely assess the tokenizer and correlate its performance to the generation quality (e.g. gFID). In this paper, we comprehensively analyze the reason for the discrepancy of reconstruction and generation qualities in a discrete latent space, and, from which, we propose a novel plug-and-play tokenizer training scheme to facilitate latent space construction. Specifically, a latent perturbation approach is proposed to simulate sampling noises, i.e., the unexpected tokens sampled, from the generative process. With the latent perturbation, we further propose (1) a novel tokenizer evaluation metric, i.e., pFID, which successfully correlates the tokenizer performance to generation quality and (2) a plug-and-play tokenizer training scheme, which significantly enhances the robustness of tokenizer thus boosting the generation quality and convergence speed. Extensive benchmarking are conducted with 11 advanced discrete image tokenizers with 2 autoregressive generation models to validate our approach. The tokenizer trained with our proposed latent perturbation achieve a notable 1.60 gFID with classifier-free guidance (CFG) and 3.45 gFID without CFG with a sim400M generator. Code: https://github.com/lxa9867/ImageFolder.

Voice dictation is an increasingly important text input modality. Existing systems that allow both dictation and editing-by-voice restrict their command language to flat templates invoked by trigger words. In this work, we study the feasibility of allowing users to interrupt their dictation with spoken editing commands in open-ended natural language. We introduce a new task and dataset, TERTiUS, to experiment with such systems. To support this flexibility in real-time, a system must incrementally segment and classify spans of speech as either dictation or command, and interpret the spans that are commands. We experiment with using large pre-trained language models to predict the edited text, or alternatively, to predict a small text-editing program. Experiments show a natural trade-off between model accuracy and latency: a smaller model achieves 30% end-state accuracy with 1.3 seconds of latency, while a larger model achieves 55% end-state accuracy with 7 seconds of latency.