# PoolFormer

## 概述

The PoolFormer model was proposed in [MetaFormer is Actually What You Need for Vision](https://huggingface.co/papers/2111.11418)  by Sea AI Labs. Instead of designing complicated token mixer to achieve SOTA performance, the target of this work is to demonstrate the competence of transformer models largely stem from the general architecture MetaFormer.

该论文的摘要如下：

*Transformers 在计算机视觉任务中展现了巨大的潜力。普遍认为，其基于注意力的 token mixer 模块是其能力的主要贡献者。然而，近期的研究表明，transformers 中的基于注意力的模块可以被空间 MLP 替换，且所得模型仍能保持相当好的性能。基于这一观察，我们假设 transformers 的通用架构，而非特定的 token mixer 模块，对模型性能更为关键。为了验证这一点，我们刻意用极其简单的空间池化算子替换 transformers 中的注意力模块，仅执行最基本的 token 混合。令人惊讶的是，我们观察到由此衍生的模型（称为 PoolFormer）在多个计算机视觉任务上取得了具有竞争力的性能。例如，在 ImageNet-1K 上，PoolFormer 达到了 82.1% 的 top-1 准确率，比经过良好调优的视觉 transformer/MLP 类基线 DeiT-B/ResMLP-B24 分别高出 0.3%/1.1% 的准确率，同时参数量减少了 35%/52%，MACs 减少了 48%/60%。PoolFormer 的有效性验证了我们的假设，并促使我们提出“MetaFormer”的概念，即从 transformers 中抽象出的、未指定 token mixer 的通用架构。基于广泛的实验，我们认为 MetaFormer 是近期 transformer 和 MLP 类模型在视觉任务上取得优异结果的关键因素。这项工作呼吁未来的研究更多地致力于改进 MetaFormer，而不是专注于 token mixer 模块。此外，我们提出的 PoolFormer 可以作为未来 MetaFormer 架构设计的起始基线。*

下图展示了 PoolFormer 的架构。摘自[原始论文](https://huggingface.co/papers/2111.11418)。

该模型由 heytanay 贡献。原始代码可在[此处](https://github.com/sail-sg/poolformer)找到。

## 使用技巧

- PoolFormer 采用分层架构，其中使用简单的平均池化层替代了 Attention。该模型的所有检查点均可在 [hub](https://huggingface.co/models?other=poolformer) 上找到。
- 可以使用 [PoolFormerImageProcessor](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerImageProcessor) 为模型准备图像。
- 与大多数模型一样，PoolFormer 提供不同的尺寸，具体详情见下表。

| **模型变体** | **深度**    | **隐藏层大小**    | **参数量（M）** | **ImageNet-1k Top 1** |
| :---------------: | ------------- | ------------------- | :------------: | :-------------------: |
| s12               | [2, 2, 6, 2]  | [64, 128, 320, 512] | 12             | 77.2                  |
| s24               | [4, 4, 12, 4] | [64, 128, 320, 512] | 21             | 80.3                  |
| s36               | [6, 6, 18, 6] | [64, 128, 320, 512] | 31             | 81.4                  |
| m36               | [6, 6, 18, 6] | [96, 192, 384, 768] | 56             | 82.1                  |
| m48               | [8, 8, 24, 8] | [96, 192, 384, 768] | 73             | 82.5                  |

## 资源

以下是来自 Hugging Face 官方和社区（以 🌎 标识）的资源列表，可帮助您快速上手 PoolFormer。

- [PoolFormerForImageClassification](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerForImageClassification) 受此 [notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/image_classification.ipynb) 支持。
- 另请参阅：[图像分类任务指南](../tasks/image_classification)

如果您有兴趣提交资源以收录在此处，请随时发起 Pull Request，我们将对其进行审核！理想情况下，该资源应展示一些新内容，而不是重复现有资源。

## PoolFormerConfig[[transformers.PoolFormerConfig]]

#### transformers.PoolFormerConfig[[transformers.PoolFormerConfig]]

```python
transformers.PoolFormerConfig(transformers_version: str | None = None, architectures: list[str] | None = None, output_hidden_states: bool | None = False, return_dict: bool | None = True, dtype: str | torch.dtype | None = None, chunk_size_feed_forward: int = 0, is_encoder_decoder: bool = False, id2label: dict[int, str] | dict[str, str] | None = None, label2id: dict[str, int] | dict[str, str] | None = None, problem_type: Literal['regression', 'single_label_classification', 'multi_label_classification'] | None = None, num_channels: int = 3, patch_size: int | list[int] | tuple[int, int] = 16, stride: int = 16, pool_size: int = 3, mlp_ratio: float = 4.0, depths: list[int] | tuple[int, ...] = (2, 2, 6, 2), hidden_sizes: list[int] | tuple[int, ...] = (64, 128, 320, 512), patch_sizes: list[int] | tuple[int, ...] = (7, 3, 3, 3), strides: list[int] | tuple[int, ...] = (4, 2, 2, 2), padding: list[int] | tuple[int, ...] = (2, 1, 1, 1), num_encoder_blocks: int = 4, drop_path_rate: float | int = 0.0, hidden_act: str = 'gelu', use_layer_scale: bool = True, layer_scale_init_value: float = 1e-05, initializer_range: float = 0.02)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/configuration_poolformer.py#L24)

**参数：**

num_channels (`int`，*可选*，默认为 `3`)：输入通道数。

patch_size (`Union[int, list[int], tuple[int, int]]`，*可选*，默认为 `16`)：每个 patch 的大小（分辨率）。

stride (`int`，*可选*，默认为 16)：输入 patch 的步长。

pool_size (`int`，*可选*，默认为 3)：池化窗口的大小。

mlp_ratio (`float`, *可选*, 默认为 `4.0`) : MLP 隐藏维度与嵌入维度的比率。

depths (`Union[list[int], tuple[int, ...]]`，*可选*，默认为 `(2, 2, 6, 2)`)：Transformer 中每一层的深度。

hidden_sizes (`Union[list[int], tuple[int, ...]]`，*可选*，默认为 `(64, 128, 320, 512)`)：模型每个阶段的维度（隐藏层大小）。

patch_sizes (`list`，*可选*，默认为 `[7, 3, 3, 3]`)：每个编码器块的输入 patch 大小。

strides (`list`，*可选*，默认为 `[4, 2, 2, 2]`)：每个编码器块中输入 patch 的步长。

padding (`list`，*可选*，默认为 `[2, 1, 1, 1]`)：每个编码器块中输入 patch 的填充。

num_encoder_blocks (`int`，*可选*，默认为 4)：编码器块的数量。

drop_path_rate (`Union[float, int]`，*可选*，默认为 `0.0`)：用于 patch 融合的 drop path 比率。

hidden_act (`str`，*可选*，默认为 `gelu`)：解码器中的非线性激活函数（函数或字符串）。例如，`"gelu"`、`"relu"`、`"silu"` 等。

use_layer_scale (`bool`，*可选*，默认为 `True`)：是否使用层缩放。

layer_scale_init_value (`float`, *可选*, 默认为 `1e-05`) : 自注意力层中使用的缩放比例。基础模型为 0.1，大型模型为 1e-6。设置为 0 可禁用层缩放。

initializer_range (`float`，*可选*，默认值为 `0.02`)：用于初始化所有权重矩阵的 truncated_normal_initializer 的标准差。

这是用于存储 PoolFormerModel 配置的类。它根据指定的参数实例化 Poolformer 模型，并定义模型架构。使用默认值实例化配置将生成与 [sail/poolformer_s12](https://huggingface.co/sail/poolformer_s12) 类似的配置。

配置对象继承自 [PreTrainedConfig](/docs/transformers/main/zh/main_classes/configuration#transformers.PreTrainedConfig)，可用于控制模型输出。有关更多信息，请参阅 [PreTrainedConfig](/docs/transformers/main/zh/main_classes/configuration#transformers.PreTrainedConfig) 的文档。

示例：

```python
>>> from transformers import PoolFormerConfig, PoolFormerModel

>>> # Initializing a PoolFormer sail/poolformer_s12 style configuration
>>> configuration = PoolFormerConfig()

>>> # Initializing a model (with random weights) from the sail/poolformer_s12 style configuration
>>> model = PoolFormerModel(configuration)

>>> # Accessing the model configuration
>>> configuration = model.config
```

## PoolFormerImageProcessor[[transformers.PoolFormerImageProcessor]]

#### transformers.PoolFormerImageProcessor[[transformers.PoolFormerImageProcessor]]

```python
transformers.PoolFormerImageProcessor(**kwargs: *<class 'transformers.models.poolformer.image_processing_poolformer.PoolFormerImageProcessorKwargs'>)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/image_processing_poolformer.py#L43)

**参数：**

do_convert_rgb (`bool`, *kwargs*, *可选*，默认为 `None`) : 是否将图像转换为 RGB。

do_resize (`bool`, *kwargs*, *可选*, 默认为 `True`) : 是否调整图像大小。

size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*，默认为 `{'shortest_edge' : 224}`)：描述输入到模型的最大尺寸。

default_to_square (`bool`, *kwargs*, *可选*，默认为 `False`) : 当 size 为整数时，是否在调整大小时默认使用正方形图像。

crop_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*，默认为 `{'height' : 224, 'width': 224}`)：应用 `center_crop` 后输出图像的尺寸。

resample (`Annotated[Union[int, PILImageResampling, NoneType], None]`, *kwargs*，默认值为 `3`) : 如果调整图像大小，则使用的重采样滤波器。它可以是枚举 `PILImageResampling` 中的一个值。仅当 `do_resize` 设置为 `True` 时才会生效。

do_rescale (`bool`, *kwargs*, *可选*，默认为 `True`)：是否对图像进行重新缩放。

rescale_factor (`float`, *kwargs*, *可选*，默认为 `0.00392156862745098`) : 当 `do_rescale` 设置为 `True` 时，用于对图像进行缩放的缩放因子。

do_normalize (`bool`，*kwargs*，*可选*，默认为 `True`)：是否对图像进行归一化。

image_mean (`Union[float, list[float], tuple[float, ...]]`, *kwargs*, *可选*，默认为 `[0.485, 0.456, 0.406]`) : 用于归一化的图像均值。仅当 `do_normalize` 设置为 `True` 时生效。

image_std (`Union[float, list[float], tuple[float, ...]]`, *kwargs*, *可选*，默认为 `[0.229, 0.224, 0.225]`) : 用于归一化的图像标准差。仅当 `do_normalize` 设置为 `True` 时生效。

do_pad (`bool`, *kwargs*, *可选*) : 是否对图像进行填充。填充操作会将图像填充至批次中的最大尺寸，或填充至每张图像的固定正方形尺寸。具体的填充策略取决于模型。

pad_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*) : 用于将图像填充到的尺寸，格式为 `{"height": int, "width" int}`。该尺寸必须大于预处理中提供的任何图像尺寸。如果未提供 `pad_size`，图像将被填充到批次中最大的高度和宽度。仅在 `do_pad=True.` 时应用。

do_center_crop (`bool`, *kwargs*, *可选*，默认为 `True`) : 是否对图像进行居中裁剪。

data_format (`Union[str, ~image_utils.ChannelDimension]`，*kwargs*，*可选*)：仅支持 `ChannelDimension.FIRST`。为兼容旧版处理器而添加。

input_data_format (`Union[str, ~image_utils.ChannelDimension]`, *kwargs*, *可选*) : 输入图像的通道维度格式。如果未设置，则从输入图像中推断通道维度格式。可以是以下之一： - `"channels_first"` 或 `ChannelDimension.FIRST`：图像为 (num_channels, height, width) 格式。 - `"channels_last"` 或 `ChannelDimension.LAST`：图像为 (height, width, num_channels) 格式。 - `"none"` 或 `ChannelDimension.NONE`：图像为 (height, width) 格式。

device (`Annotated[Union[str, torch.device, NoneType], None]`, *kwargs*)：用于处理视频的设备。如果未设置，则从输入视频中推断设备。

return_tensors (`Annotated[str | ~utils.generic.TensorType | None, None]`, *kwargs*) : 如果设置为 `'pt'`，则返回堆叠的张量，否则返回张量列表。

disable_grouping (`bool`, *kwargs*, *可选*) : 是否禁用按尺寸对图像进行分组，从而逐个处理图像而非批量处理。如果为 None，则当图像位于 CPU 上时设置为 True，否则设置为 False。此选择基于经验观察，详见此处：https://github.com/huggingface/transformers/pull/38157

image_seq_length (`int`, *kwargs*, *可选*) : 输入中每张图片所使用的图像 token 数量。为向后兼容而添加，但在未来的模型中，应将其设置为处理器的属性。

crop_pct (`float`, *kwargs*, *可选*，默认为 `self.crop_pct`) : 要裁剪的图像比例。仅当 `do_resize` 设置为 `True` 时生效。

构建一个 PoolFormerImageProcessor 图像处理器。

#### preprocess[[transformers.PoolFormerImageProcessor.preprocess]]

```python
preprocess(images: typing.Union[ForwardRef('PIL.Image.Image'), numpy.ndarray, ForwardRef('torch.Tensor'), list['PIL.Image.Image'], list[numpy.ndarray], list['torch.Tensor']], *args, image_like_kwargs: dict[str, typing.Any] | None = None, **kwargs: *<class 'transformers.processing_utils.ImagesKwargs'>)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/image_processing_utils.py#L382)

**参数：**

images (`Union[PIL.Image.Image, numpy.ndarray, torch.Tensor, list[PIL.Image.Image], list[numpy.ndarray], list[torch.Tensor]]`) : 要预处理的图像。期望输入单张或一批像素值在 0 到 255 之间的图像。如果传入的图像像素值在 0 到 1 之间，请设置 `do_rescale=False`。

image_like_kwargs (`dict[str, Any]`，*可选*)：用于额外图像类输入的开发者标志，这些输入也将被预处理。仅在以关键字参数传递输入不起作用时使用此标志。例如，`preprocess(images, masks=masks)` 是首选方式，但对于某些模型会导致参数优先级问题。在这种情况下，可以改用 `preprocess(images, image_like_inputs={"masks": masks})`。

do_convert_rgb (`bool`, *kwargs*, *可选*) : 是否将图像转换为 RGB。

do_resize (`bool`，*kwargs*，*可选*)：是否调整图像大小。

size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*)：描述模型的最大输入维度。

default_to_square (`bool`, *kwargs*, *可选*) : 当 size 为 int 时，是否在调整大小时默认使用正方形图像。

crop_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*) : 应用 `center_crop` 后输出图像的尺寸。

resample (`Annotated[Union[int, PILImageResampling, NoneType], None]`, *kwargs*) : 如果调整图像大小，则使用的重采样滤波器。它可以是枚举 `PILImageResampling` 中的一个值。仅当 `do_resize` 设置为 `True` 时才会生效。

do_rescale (`bool`, *kwargs*, *可选*) : 是否对图像进行重新缩放。

rescale_factor (`float`, *kwargs*, *可选*) : 当 `do_rescale` 设置为 `True` 时，用于对图像进行缩放的缩放因子。

do_normalize (`bool`, *kwargs*, *可选*) : 是否对图像进行归一化。

image_mean (`Union[float, list[float], tuple[float, ...]]`，*kwargs*，*可选*)：用于归一化的图像均值。仅当 `do_normalize` 设置为 `True` 时生效。

image_std (`Union[float, list[float], tuple[float, ...]]`, *kwargs*, *可选*) : 用于归一化的图像标准差。仅当 `do_normalize` 设置为 `True` 时生效。

do_pad (`bool`, *kwargs*, *可选*) : 是否对图像进行填充。填充操作会将图像填充至批次中的最大尺寸，或填充至每张图像的固定正方形尺寸。具体的填充策略取决于模型。

pad_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*) : 用于将图像填充到的尺寸，格式为 `{"height": int, "width" int}`。该尺寸必须大于预处理中提供的任何图像尺寸。如果未提供 `pad_size`，图像将被填充到批次中最大的高度和宽度。仅在 `do_pad=True.` 时应用。

do_center_crop (`bool`, *kwargs*, *可选*) : 是否对图像进行居中裁剪。

data_format (`Union[str, ~image_utils.ChannelDimension]`，*kwargs*，*可选*)：仅支持 `ChannelDimension.FIRST`。为兼容旧版处理器而添加。

input_data_format (`Union[str, ~image_utils.ChannelDimension]`, *kwargs*, *可选*) : 输入图像的通道维度格式。如果未设置，则从输入图像中推断通道维度格式。可以是以下之一： - `"channels_first"` 或 `ChannelDimension.FIRST`：图像为 (num_channels, height, width) 格式。 - `"channels_last"` 或 `ChannelDimension.LAST`：图像为 (height, width, num_channels) 格式。 - `"none"` 或 `ChannelDimension.NONE`：图像为 (height, width) 格式。

device (`Annotated[Union[str, torch.device, NoneType], None]`, *kwargs*)：用于处理视频的设备。如果未设置，则从输入视频中推断设备。

return_tensors (`Annotated[str | ~utils.generic.TensorType | None, None]`, *kwargs*) : 如果设置为 `'pt'`，则返回堆叠的张量，否则返回张量列表。

disable_grouping (`bool`, *kwargs*, *可选*) : 是否禁用按尺寸对图像进行分组，从而逐个处理图像而非批量处理。如果为 None，则当图像位于 CPU 上时设置为 True，否则设置为 False。此选择基于经验观察，详见此处：https://github.com/huggingface/transformers/pull/38157

image_seq_length (`int`, *kwargs*, *可选*) : 输入中每张图片所使用的图像 token 数量。为向后兼容而添加，但在未来的模型中，应将其设置为处理器的属性。

**返回：** `~image_processing_base.BatchFeature`

- **data** (`dict`) -- 由 __call__ 方法返回的列表/数组/张量字典（例如 'pixel_values'）。
- **tensor_type** (`Union[None, str, TensorType]`，*可选*) -- 您可以在此处指定 tensor_type，以便在初始化时将 PyTorch/Numpy 张量中的整数列表进行转换。

预处理一张图像或一批图像。

## PoolFormerImageProcessorPil[[transformers.PoolFormerImageProcessorPil]]

#### transformers.PoolFormerImageProcessorPil[[transformers.PoolFormerImageProcessorPil]]

```python
transformers.PoolFormerImageProcessorPil(**kwargs: *<class 'transformers.models.poolformer.image_processing_pil_poolformer.PoolFormerImageProcessorKwargs'>)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/image_processing_pil_poolformer.py#L43)

**参数：**

do_convert_rgb (`bool`, *kwargs*, *可选*，默认为 `None`) : 是否将图像转换为 RGB。

do_resize (`bool`, *kwargs*, *可选*, 默认为 `True`) : 是否调整图像大小。

size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*，默认为 `{'shortest_edge' : 224}`)：描述输入到模型的最大尺寸。

default_to_square (`bool`, *kwargs*, *可选*，默认为 `False`) : 当 size 为整数时，是否在调整大小时默认使用正方形图像。

crop_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*，默认为 `{'height' : 224, 'width': 224}`)：应用 `center_crop` 后输出图像的尺寸。

resample (`Annotated[Union[int, PILImageResampling, NoneType], None]`, *kwargs*，默认值为 `3`) : 如果调整图像大小，则使用的重采样滤波器。它可以是枚举 `PILImageResampling` 中的一个值。仅当 `do_resize` 设置为 `True` 时才会生效。

do_rescale (`bool`, *kwargs*, *可选*，默认为 `True`)：是否对图像进行重新缩放。

rescale_factor (`float`, *kwargs*, *可选*，默认为 `0.00392156862745098`) : 当 `do_rescale` 设置为 `True` 时，用于对图像进行缩放的缩放因子。

do_normalize (`bool`，*kwargs*，*可选*，默认为 `True`)：是否对图像进行归一化。

image_mean (`Union[float, list[float], tuple[float, ...]]`, *kwargs*, *可选*，默认为 `[0.485, 0.456, 0.406]`) : 用于归一化的图像均值。仅当 `do_normalize` 设置为 `True` 时生效。

image_std (`Union[float, list[float], tuple[float, ...]]`, *kwargs*, *可选*，默认为 `[0.229, 0.224, 0.225]`) : 用于归一化的图像标准差。仅当 `do_normalize` 设置为 `True` 时生效。

do_pad (`bool`, *kwargs*, *可选*) : 是否对图像进行填充。填充操作会将图像填充至批次中的最大尺寸，或填充至每张图像的固定正方形尺寸。具体的填充策略取决于模型。

pad_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*) : 用于将图像填充到的尺寸，格式为 `{"height": int, "width" int}`。该尺寸必须大于预处理中提供的任何图像尺寸。如果未提供 `pad_size`，图像将被填充到批次中最大的高度和宽度。仅在 `do_pad=True.` 时应用。

do_center_crop (`bool`, *kwargs*, *可选*，默认为 `True`) : 是否对图像进行居中裁剪。

data_format (`Union[str, ~image_utils.ChannelDimension]`，*kwargs*，*可选*)：仅支持 `ChannelDimension.FIRST`。为兼容旧版处理器而添加。

input_data_format (`Union[str, ~image_utils.ChannelDimension]`, *kwargs*, *可选*) : 输入图像的通道维度格式。如果未设置，则从输入图像中推断通道维度格式。可以是以下之一： - `"channels_first"` 或 `ChannelDimension.FIRST`：图像为 (num_channels, height, width) 格式。 - `"channels_last"` 或 `ChannelDimension.LAST`：图像为 (height, width, num_channels) 格式。 - `"none"` 或 `ChannelDimension.NONE`：图像为 (height, width) 格式。

device (`Annotated[Union[str, torch.device, NoneType], None]`, *kwargs*)：用于处理视频的设备。如果未设置，则从输入视频中推断设备。

return_tensors (`Annotated[str | ~utils.generic.TensorType | None, None]`, *kwargs*) : 如果设置为 `'pt'`，则返回堆叠的张量，否则返回张量列表。

disable_grouping (`bool`, *kwargs*, *可选*) : 是否禁用按尺寸对图像进行分组，从而逐个处理图像而非批量处理。如果为 None，则当图像位于 CPU 上时设置为 True，否则设置为 False。此选择基于经验观察，详见此处：https://github.com/huggingface/transformers/pull/38157

image_seq_length (`int`, *kwargs*, *可选*) : 输入中每张图片所使用的图像 token 数量。为向后兼容而添加，但在未来的模型中，应将其设置为处理器的属性。

crop_pct (`float`, *kwargs*, *可选*，默认为 `self.crop_pct`) : 要裁剪的图像比例。仅当 `do_resize` 设置为 `True` 时生效。

构建一个 PoolFormerImageProcessor 图像处理器。

#### preprocess[[transformers.PoolFormerImageProcessorPil.preprocess]]

```python
preprocess(images: typing.Union[ForwardRef('PIL.Image.Image'), numpy.ndarray, ForwardRef('torch.Tensor'), list['PIL.Image.Image'], list[numpy.ndarray], list['torch.Tensor']], *args, image_like_kwargs: dict[str, typing.Any] | None = None, **kwargs: *<class 'transformers.processing_utils.ImagesKwargs'>)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/image_processing_utils.py#L382)

**参数：**

images (`Union[PIL.Image.Image, numpy.ndarray, torch.Tensor, list[PIL.Image.Image], list[numpy.ndarray], list[torch.Tensor]]`) : 要预处理的图像。期望输入单张或一批像素值在 0 到 255 之间的图像。如果传入的图像像素值在 0 到 1 之间，请设置 `do_rescale=False`。

image_like_kwargs (`dict[str, Any]`，*可选*)：用于额外图像类输入的开发者标志，这些输入也将被预处理。仅在以关键字参数传递输入不起作用时使用此标志。例如，`preprocess(images, masks=masks)` 是首选方式，但对于某些模型会导致参数优先级问题。在这种情况下，可以改用 `preprocess(images, image_like_inputs={"masks": masks})`。

do_convert_rgb (`bool`, *kwargs*, *可选*) : 是否将图像转换为 RGB。

do_resize (`bool`，*kwargs*，*可选*)：是否调整图像大小。

size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*)：描述模型的最大输入维度。

default_to_square (`bool`, *kwargs*, *可选*) : 当 size 为 int 时，是否在调整大小时默认使用正方形图像。

crop_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*) : 应用 `center_crop` 后输出图像的尺寸。

resample (`Annotated[Union[int, PILImageResampling, NoneType], None]`, *kwargs*) : 如果调整图像大小，则使用的重采样滤波器。它可以是枚举 `PILImageResampling` 中的一个值。仅当 `do_resize` 设置为 `True` 时才会生效。

do_rescale (`bool`, *kwargs*, *可选*) : 是否对图像进行重新缩放。

rescale_factor (`float`, *kwargs*, *可选*) : 当 `do_rescale` 设置为 `True` 时，用于对图像进行缩放的缩放因子。

do_normalize (`bool`, *kwargs*, *可选*) : 是否对图像进行归一化。

image_mean (`Union[float, list[float], tuple[float, ...]]`，*kwargs*，*可选*)：用于归一化的图像均值。仅当 `do_normalize` 设置为 `True` 时生效。

image_std (`Union[float, list[float], tuple[float, ...]]`, *kwargs*, *可选*) : 用于归一化的图像标准差。仅当 `do_normalize` 设置为 `True` 时生效。

do_pad (`bool`, *kwargs*, *可选*) : 是否对图像进行填充。填充操作会将图像填充至批次中的最大尺寸，或填充至每张图像的固定正方形尺寸。具体的填充策略取决于模型。

pad_size (`Annotated[int | list[int] | tuple[int, ...] | dict[str, int] | None, None]`, *kwargs*) : 用于将图像填充到的尺寸，格式为 `{"height": int, "width" int}`。该尺寸必须大于预处理中提供的任何图像尺寸。如果未提供 `pad_size`，图像将被填充到批次中最大的高度和宽度。仅在 `do_pad=True.` 时应用。

do_center_crop (`bool`, *kwargs*, *可选*) : 是否对图像进行居中裁剪。

data_format (`Union[str, ~image_utils.ChannelDimension]`，*kwargs*，*可选*)：仅支持 `ChannelDimension.FIRST`。为兼容旧版处理器而添加。

input_data_format (`Union[str, ~image_utils.ChannelDimension]`, *kwargs*, *可选*) : 输入图像的通道维度格式。如果未设置，则从输入图像中推断通道维度格式。可以是以下之一： - `"channels_first"` 或 `ChannelDimension.FIRST`：图像为 (num_channels, height, width) 格式。 - `"channels_last"` 或 `ChannelDimension.LAST`：图像为 (height, width, num_channels) 格式。 - `"none"` 或 `ChannelDimension.NONE`：图像为 (height, width) 格式。

device (`Annotated[Union[str, torch.device, NoneType], None]`, *kwargs*)：用于处理视频的设备。如果未设置，则从输入视频中推断设备。

return_tensors (`Annotated[str | ~utils.generic.TensorType | None, None]`, *kwargs*) : 如果设置为 `'pt'`，则返回堆叠的张量，否则返回张量列表。

disable_grouping (`bool`, *kwargs*, *可选*) : 是否禁用按尺寸对图像进行分组，从而逐个处理图像而非批量处理。如果为 None，则当图像位于 CPU 上时设置为 True，否则设置为 False。此选择基于经验观察，详见此处：https://github.com/huggingface/transformers/pull/38157

image_seq_length (`int`, *kwargs*, *可选*) : 输入中每张图片所使用的图像 token 数量。为向后兼容而添加，但在未来的模型中，应将其设置为处理器的属性。

**返回：** `~image_processing_base.BatchFeature`

- **data** (`dict`) -- 由 __call__ 方法返回的列表/数组/张量字典（例如 'pixel_values'）。
- **tensor_type** (`Union[None, str, TensorType]`，*可选*) -- 您可以在此处指定 tensor_type，以便在初始化时将 PyTorch/Numpy 张量中的整数列表进行转换。

预处理一张图像或一批图像。

## PoolFormerModel[[transformers.PoolFormerModel]]

#### transformers.PoolFormerModel[[transformers.PoolFormerModel]]

```python
transformers.PoolFormerModel(config: PoolFormerConfig)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/modeling_poolformer.py#L252)

**参数：**

config ([PoolFormerConfig](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerConfig))：模型配置类，包含模型的所有参数。使用配置文件进行初始化时，不会加载与模型关联的权重，仅加载配置。请查看 [from_pretrained()](/docs/transformers/main/zh/main_classes/model#transformers.PreTrainedModel.from_pretrained) 方法以加载模型权重。

未附加任何特定头部的裸 Poolformer 模型，直接输出原始隐藏状态。

该模型继承自 [PreTrainedModel](/docs/transformers/main/zh/main_classes/model#transformers.PreTrainedModel)。请查阅父类文档，了解该库为所有模型实现的通用方法（例如下载或保存、调整输入嵌入大小、剪枝头等）。

该模型也是 PyTorch [torch.nn.Module](https://pytorch.org/docs/stable/nn.html#torch.nn.Module) 的子类。请将其作为常规的 PyTorch Module 使用，有关通用用法和行为的所有事项，请参阅 PyTorch 文档。

#### forward[[transformers.PoolFormerModel.forward]]

```python
forward(pixel_values: typing.Optional[torch.Tensor] = None, output_hidden_states: bool | None = None, return_dict: bool | None = None, **kwargs)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/modeling_poolformer.py#L269)

**参数：**

pixel_values (`torch.Tensor`，形状为 `(batch_size, num_channels, image_size, image_size)`，*可选*) : 与输入图像对应的张量。可以使用 [PoolFormerImageProcessor](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerImageProcessor) 获取像素值。有关详细信息，请参阅 [PoolFormerImageProcessor.__call__()](/docs/transformers/main/zh/model_doc/molmo2#transformers.Molmo2ImageProcessor.__call__)（`processor_class` 使用 [PoolFormerImageProcessor](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerImageProcessor) 处理图像）。

output_hidden_states (`bool`, *可选*) : 是否返回所有层的隐藏状态。有关更多详细信息，请参阅返回张量中的 `hidden_states`。

return_dict (`bool`, *可选*) : 是否返回 [ModelOutput](/docs/transformers/main/zh/main_classes/output#transformers.utils.ModelOutput) 而不是普通元组。

**返回：** `BaseModelOutputWithNoAttention` 或 `tuple(torch.Tensor)`

`BaseModelOutputWithNoAttention` 或 `torch.Tensor` 元组（如果传入了 `return_dict=False` 或 `config.return_dict=False`），其包含的元素取决于配置（[PoolFormerConfig](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerConfig)）和输入。

[PoolFormerModel](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerModel) 的 forward 方法重写了 `__call__` 特殊方法。

尽管前向传播的实现需要在此函数中定义，但之后应调用 `Module` 实例，而不是直接调用此函数，因为前者会负责执行预处理和后处理步骤，而后者会静默地忽略这些步骤。

- **last_hidden_state**（形状为 `(batch_size, num_channels, height, width)` 的 `torch.Tensor`）-- 模型最后一层输出的隐藏状态序列。
- **hidden_states** (`tuple(torch.Tensor)`，*可选*，在传入 `output_hidden_states=True` 或 `config.output_hidden_states=True` 时返回) -- 一个 `torch.Tensor` 元组（如果模型具有嵌入层，则包含嵌入层输出的一个张量，以及每个层输出的一个张量），形状为 `(batch_size, num_channels, height, width)`。

  模型在每一层输出处的隐藏状态，以及可选的初始嵌入输出。

示例：

```python
```

## PoolFormerForImageClassification[[transformers.PoolFormerForImageClassification]]

#### transformers.PoolFormerForImageClassification[[transformers.PoolFormerForImageClassification]]

```python
transformers.PoolFormerForImageClassification(config: PoolFormerConfig)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/modeling_poolformer.py#L316)

**参数：**

config ([PoolFormerConfig](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerConfig))：模型配置类，包含模型的所有参数。使用配置文件进行初始化时，不会加载与模型关联的权重，仅加载配置。请查看 [from_pretrained()](/docs/transformers/main/zh/main_classes/model#transformers.PreTrainedModel.from_pretrained) 方法以加载模型权重。

PoolFormer 模型，顶部带有图像分类头

该模型继承自 [PreTrainedModel](/docs/transformers/main/zh/main_classes/model#transformers.PreTrainedModel)。请查阅父类文档，了解该库为所有模型实现的通用方法（例如下载或保存、调整输入嵌入大小、剪枝头等）。

该模型也是 PyTorch [torch.nn.Module](https://pytorch.org/docs/stable/nn.html#torch.nn.Module) 的子类。请将其作为常规的 PyTorch Module 使用，有关通用用法和行为的所有事项，请参阅 PyTorch 文档。

#### forward[[transformers.PoolFormerForImageClassification.forward]]

```python
forward(pixel_values: typing.Optional[torch.Tensor] = None, labels: typing.Optional[torch.LongTensor] = None, output_hidden_states: bool | None = None, return_dict: bool | None = None, **kwargs)
```

[来源](https://github.com/huggingface/transformers/blob/main/src/transformers/models/poolformer/modeling_poolformer.py#L338)

**参数：**

pixel_values (`torch.Tensor`，形状为 `(batch_size, num_channels, image_size, image_size)`，*可选*) : 与输入图像对应的张量。可以使用 [PoolFormerImageProcessor](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerImageProcessor) 获取像素值。有关详细信息，请参阅 [PoolFormerImageProcessor.__call__()](/docs/transformers/main/zh/model_doc/molmo2#transformers.Molmo2ImageProcessor.__call__)（`processor_class` 使用 [PoolFormerImageProcessor](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerImageProcessor) 处理图像）。

labels (`torch.LongTensor`，形状为 `(batch_size,)`，*可选*) : 用于计算图像分类/回归损失的标签。索引应在 `[0, ..., config.num_labels - 1]` 范围内。如果 `config.num_labels == 1`，则计算回归损失（均方损失）；如果 `config.num_labels > 1`，则计算分类损失（交叉熵）。

output_hidden_states (`bool`, *可选*) : 是否返回所有层的隐藏状态。有关更多详细信息，请参阅返回张量中的 `hidden_states`。

return_dict (`bool`, *可选*) : 是否返回 [ModelOutput](/docs/transformers/main/zh/main_classes/output#transformers.utils.ModelOutput) 而不是普通元组。

**返回：** [ImageClassifierOutputWithNoAttention](/docs/transformers/main/zh/main_classes/output#transformers.modeling_outputs.ImageClassifierOutputWithNoAttention) 或 `tuple(torch.Tensor)`

一个 [ImageClassifierOutputWithNoAttention](/docs/transformers/main/zh/main_classes/output#transformers.modeling_outputs.ImageClassifierOutputWithNoAttention) 或 `torch.Tensor` 元组（如果传入了 `return_dict=False` 或 `config.return_dict=False`），其包含的元素取决于配置（[PoolFormerConfig](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerConfig)）和输入。

[PoolFormerForImageClassification](/docs/transformers/main/zh/model_doc/poolformer#transformers.PoolFormerForImageClassification) 的 forward 方法重写了 `__call__` 特殊方法。

尽管前向传播的实现需要在此函数中定义，但之后应调用 `Module` 实例，而不是直接调用此函数，因为前者会负责执行预处理和后处理步骤，而后者会静默地忽略这些步骤。

- **loss** (`torch.Tensor`，形状为 `(1,)`，*可选*，当提供 `labels` 时返回) -- 分类损失（如果 config.num_labels==1，则为回归损失）。
- **logits**（形状为 `(batch_size, config.num_labels)` 的 `torch.Tensor`）-- 分类（或当 config.num_labels==1 时为回归）得分（SoftMax 之前）。
- **hidden_states** (`tuple(torch.Tensor)`，*可选*，在传入 `output_hidden_states=True` 或 `config.output_hidden_states=True` 时返回) -- 一个 `torch.Tensor` 元组（如果模型具有嵌入层，则包含嵌入层输出的一个张量，以及每个阶段输出的一个张量），形状为 `(batch_size, num_channels, height, width)`。模型在每个阶段输出处的隐藏状态（也称为特征图）。

示例：

```python
>>> from transformers import AutoImageProcessor, PoolFormerForImageClassification
>>> import torch
>>> from datasets import load_dataset

>>> dataset = load_dataset("huggingface/cats-image")
>>> image = dataset["test"]["image"][0]

>>> image_processor = AutoImageProcessor.from_pretrained("sail/poolformer_s12")
>>> model = PoolFormerForImageClassification.from_pretrained("sail/poolformer_s12")

>>> inputs = image_processor(image, return_tensors="pt")

>>> with torch.no_grad():
...     logits = model(**inputs).logits

>>> # model predicts one of the 1000 ImageNet classes
>>> predicted_label = logits.argmax(-1).item()
>>> print(model.config.id2label[predicted_label])
...
```

